This is the command airspy_gpiodir that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
airspy_gpiodir - reconfigure GPIO Direction
DESCRIPTION
The Airspy is a tiny and efficient software defined radio receiver.
WARNING this tool reconfigures AirSpy GPIO Direction IN/OUT and can destroy GPIO/MCU in
case of mistake
SYNOPSIS
airspy_gpiodir
OPTIONS
-p, --port_no <p>: set port number<p>[0,7] for subsequent read/write operations0
-n, --pin_no <n>: set pin number<n>[0,31] for subsequent read/write operations0
-r, --read: read port number/pin number direction specified by last -n argument, or all
port/pin0
-w, --write <v>: write value port direction specified by last -n argument with
value<v>[0,1]0
[-s serial_number_64bits]: Open board with specified 64bits serial number.0
Examples
<command> -p 0 -n 12 -r # reads gpio port direction from port 0 pin number 120
<command> -r # reads gpio direction all pins on all ports0
<command> -p 0 -n 10 -w 1 # writes gpio direction port 0 pin number 10 with 1(output)
decimal0
Use airspy_gpiodir online using onworks.net services
