EnglishFrenchSpanish

OnWorks favicon

netwatch - Online in the Cloud

Run netwatch in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command netwatch that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


Netwatch - Ethernet Internet Protocol Monitor

SYNOPSIS


netwatch [ -h ] [-b] [-i dd.dd.dd.dd] [-m dd.dd.dd.dd] [-n] [ - t] [ -e ethnum ] [ -c
netconfigfile ]

DESCRIPTION


Netwatch examines all the packets travelling on an ethernet and analyses the IP packets.
The information is tallied according to the source and destination hosts. An ncurses
display indicates a dual-list status for all hosts. The left display refers to LOCAL
hosts. The right list refers to REMOTE hosts. It is possible to examine statistics
(counts) on number of packets, bytes, IP service type and last communication host for each
host. Use the arrow keys (left and right) to change the display.

OPTIONS

-e ethnum
ethnum is the name of the ethernet device to attempt to run with netwatch. (e.g.
-e eth1 selects the eth1 device rather than the default eth0 device.

-c confignetfile
selects the name of the file which contains the ifconfig information. Note that
this is not necessary since netwatch will use the route information from /proc/net
to build all the information needed (without using ANY configuration file).

-b For a transparent bridge, ignore every other packet... (older kernels)

-i dd.dd.dd.dd
Fake a local internet address for "this" machine... (useful in making fake local
net for monitoring when combined with the -m option )

-m dd.dd.dd.dd
Fake the netmask which is used for the local net evaluation

-n Do not resolve names (just display addresses)

-h Simple help information

-t Start Netwatch in TOP Mode (30 sec. startup delay)

USER COMMANDS


The following description will attempt to clarify what keys netwatch understands. It is
important to know that the program is mode dependent. This means commands may change
depending on the current mode. The primary mode is dual-list mode. In this mode use

<tab> key - switch scroll display to the other list (dual-lists). Look for KEY.

<left> key - Change display options (moving left through the options)

<right>
key - Change display options (moving right through the options)

<up> key - Scroll to previous host page on the current list (see KEY) Change display
options (moving right through the options)

<down> key - Scroll to next host page on the current list (see KEY)

h key - gives help screen

t key - Toggle TOP mode (where 30 sec update on busiest hosts)

c key - Clear counts for all hosts

n key - Clean the remote & local host tables

N key - Clean the remote OR local host tables (depends on which is current)

L key - Produce LOG of current display entries (REMOTE or LOCAL)

b key - Toggle display of BLUE entries (OLD)

d key - Toggle display of DOMAIN entries (Name Server Queries)

w key - Enter WATCH mode for viewing ROUTING stats and HOST packets

<F10>, <END>
or q key - Exits the program

Use netwatch online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

  • 1
    strikr
    strikr
    Strikr Free Software project. Artifacts
    released under a 'intent based'
    dual license: AGPLv3 (community) and
    CC-BY-NC-ND 4.0 international
    (commercial)...
    Download strikr
  • 3
    GIFLIB
    GIFLIB
    giflib is a library for reading and
    writing gif images. It is API and ABI
    compatible with libungif which was in
    wide use while the LZW compression
    algorithm was...
    Download GIFLIB
  • 4
    Alt-F
    Alt-F
    Alt-F provides a free and open source
    alternative firmware for the DLINK
    DNS-320/320L/321/323/325/327L and
    DNR-322L. Alt-F has Samba and NFS;
    supports ext2/3/4...
    Download Alt-F
  • 5
    usm
    usm
    Usm is a unified slackware package
    manager that handles automatic
    dependency resolution. It unifies
    various package repositories including
    slackware, slacky, p...
    Download usm
  • 6
    Chart.js
    Chart.js
    Chart.js is a Javascript library that
    allows designers and developers to draw
    all kinds of charts using the HTML5
    canvas element. Chart js offers a great
    array ...
    Download Chart.js
  • More »

Linux commands

Ad