This is the command qping that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
qping - check application status of Sun Grid Engine daemons.
SYNTAX
qping [-help] [-noalias] [-ssl|-tcp] [ [ [-i <interval>] [-info] [-f] ] | [ [-dump_tag tag
[param] ] [-dump] [-nonewline] ] ] <host> <port> <name> <id>
DESCRIPTION
Qping is used to validate the runtime status of a Sun Grid Engine service daemon. The
current Sun Grid Engine implementation allows one to query the SGE_QMASTER daemon and any
running SGE_EXECD daemon. The qping command is used to send a SIM (Status Information
Message) to the destination daemon. The communication layer of the specified daemon will
respond with a SIRM (Status Information Response Message) which contains status
information about the consulted daemon.
The qping -dump and -dump_tag options allowing an administrator to observe the
communication protocol data flow of a Sun Grid Engine service daemon. The qping -dump
instruction must be started with root account and on the same host where the observed
daemon is running.
OPTIONS
-f
Show full status information on each ping interval.
First output Line: The first output line shows the date and time of the request.
SIRM version: Internal version number of the SIRM (Status Information Response Message)
SIRM message id: Current message id for this connection
start time: Start time of daemon. The format is as follows:
MM/DD/YYYY HH:MM:SS (seconds since 01.01.1970)
run time [s]: Run time in seconds since start time
messages in read buffer: Nr. of buffered messages in communication buffer. The messages
are buffered for the application (daemon). When this number grows too large the daemon is
not able to handle all messages sent to it.
messages in write buffer: Nr. of buffered messages in the communication write buffer. The
messages are sent from the application (daemon) to the connected clients, but the
communication layer wasn't able to send the messages yet. If this number grows too large,
the communication layer isn't able to send them as fast as the application (daemon) wants
the messages to be sent.
nr. of connected clients: This is the number of actual connected clients to this daemon.
This also implies the current qping connection.
status: The status value of the daemon. This value depends on the application which reply
to the qping request. If the application does not provide any information the status is
99999. Here are the possible status information values for the Sun Grid Engine daemons:
qmaster:
0 There is no unusual timing situation.
1 One or more threads has reached warning timeout. This may happen when at least one
thread does not increment his time stamp for a not usual long time. A possible
reason for this is a high workload for this thread.
2 One or more threads has reached error timeout. This may happen when at least one
thread has not incremented his time stamp for longer than 10 minutes.
3 The time measurement is not initialized.
execd:
0 There is no unusual timing situation.
1 Dispatcher has reached warning timeout. This may happen when the dispatcher does
not increment his time stamp for a unusual long time. A possible reason for this is
a high workload.
2 Dispatcher has reached error timeout. This may happen when the dispatcher has not
incremented his time stamp for longer than 10 minutes.
3 The time measurement is not initialized.
info: Status message of the daemon. This value depends on the application which reply to
the qping request. If the application does not provide any information the info message
is "not available". Here are the possible status information values for the Sun Grid
Engine daemons:
qmaster:
The info message contains information about the qmaster threads followed by a thread
state and time information. Each time when one of the known threads pass through
their main loop the time information is updated. Since the qmaster has two message
threads every message thread updates the time. This means the timeout for the
message thread (MT) can only occur when no message thread is active anymore:
THREAD_NAME: THREAD_STATE (THREAD_TIME)
THREAD_NAME:
MAIN: Main thread
signaler: Signal thread
event_master: Event master thread
timer: Timer thread
worker: Worker thread
listener: Listener thread
scheduler: Scheduler thread
jvm: Java thread
The thread names above will be followed by a 3 digit number.
THREAD_STATE:
R: Running
W: Warning
E: Error
THREAD_TIME:
Time since last timestamp updating.
After the dispatcher information follows an additional information string which
describes the complete application status.
execd:
The info message contains information for the execd job dispatcher:
dispatcher: STATE (TIME)
STATE:
R: Running
W: Warning
E: Error
TIME:
Time since last timestamp updating.
After the thread information follows an additional information string which describes
the application status.
Monitor: If available, displays statistics on a thread. The data for each thread is displayed
in one line. The format of this line can be changed at any time. Only the master implements
the monitoring.
-help
Prints a list of all options.
-i interval
Set qping interval time.
The default interval time is one second. Qping will send a SIM (Status Information
Message) on each interval time.
-info
Show full status information (see -f for more information) and exit. The exit value 0
indicates no error. On errors qping returns with 1.
-noalias
Ignore host_aliases file, which is located at <sge_root>/<cell>/common/host_aliases. If
this option is used it is not necessary to set any Sun Grid Engine environment variable.
-ssl
This option can be used to specify an SSL (Secure Socket Layer) configuration. The qping
will use the configuration to connect to services running SSL. If the SGE settings file is
not sourced, you have to use the -noalias option to bypass the need for the SGE_ROOT
environment variable. The following environment variables are used to specify your
certificates:
SSL_CA_CERT_FILE - CA certificate file
SSL_CERT_FILE - certificates file
SSL_KEY_FILE - key file
SSL_RAND_FILE - rand file
-tcp
This option is used to select TCP/IP as the protocol used to connect to other services.
-nonewline
Dump output will not have a linebreak within a message and binary messages are not
unpacked.
-dump
This option allows an administrator to observe the communication protocol data flow of a
Sun Grid Engine service daemon. The qping -dump instruction must be started as root and on
the same host where the observed daemon is running.
The output is written to stdout. The environment variable "SGE_QPING_OUTPUT_FORMAT" can be
set to hide columns, set a default column width or to set a hostname output format. The
value of the environment variable can be set to any combination of the following
specifiers separated by a space character:
"h:X" -> hide column X
"s:X" -> show column X
"w:X:Y" -> set width of column X to Y
"hn:X" -> set hostname output parameter X.
X values are "long" or "short"
Start qping -help to see which columns are available.
-dump_tag tag [param]
This option has the same the same meaning as -dump, but can provide more information by
specifying the debug level and message types qping should print:
-dump_tag ALL <debug level>
This option shows all possible debug messages (APP+MSG) for the debug levels, ERROR,
WARNING, INFO, DEBUG and DPRINTF. The contacted service must support this kind of
debugging. This option is not currently implemented.
-dump_tag APP <debug level>
This option shows only application debug messages for the debug levels, ERROR,
WARNING, INFO, DEBUG and DPRINTF. The contacted service must support this kind of
debugging. This option is not currently implemented.
-dump_tag MSG
This option has the same behavior as the -dump option.
host
Host where daemon is running.
port
Port which daemon has bound (used sge_qmaster/sge_execd port number).
name
Name of communication endpoint ("qmaster" or "execd"). A communication endpoint is a
triplet of hostname/endpoint name/endpoint id (e.g. hostA/qmaster/1 or subhost/qstat/4).
id
Id of communication endpoint ("1" for daemons)
EXAMPLES
>qping master_host 31116 qmaster
08/24/2004 16:41:15 endpoint master_host/qmaster/1 at port 31116 is up since 365761 seconds
08/24/2004 16:41:16 endpoint master_host/qmaster/1 at port 31116 is up since 365762 seconds
08/24/2004 16:41:17 endpoint master_host/qmaster/1 at port 31116 is up since 365763 seconds
> qping -info master_host 31116 qmaster 1
08/24/2004 16:42:47:
SIRM version: 0.1
SIRM message id: 1
start time: 08/20/2004 11:05:14 (1092992714)
run time [s]: 365853
messages in read buffer: 0
messages in write buffer: 0
nr. of connected clients: 4
status: 0
info: ok
> qping -info execd_host 31117 execd 1
08/24/2004 16:43:45:
SIRM version: 0.1
SIRM message id: 1
start time: 08/20/2004 11:06:13 (1092992773)
run time [s]: 365852
messages in read buffer: 0
messages in write buffer: 0
nr. of connected clients: 2
status: 0
info: ok
ENVIRONMENTAL VARIABLES
SGE_ROOT Specifies the location of the Sun Grid Engine standard configuration files.
SGE_CELL If set, specifies the default Sun Grid Engine cell.
Use qping online using onworks.net services
