This is the command uhd_siggen_gui that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
uhd_siggen_gui - GNU Radio signal generator using UHD hardware
SYNOPSIS
uhd_siggen_gui: [options]
DESCRIPTION
GUI to allow UHD supported hardware to be a signal generator.
OPTIONS
-h, --help
show this help message and exit
-a ARGS, --args=ARGS
UHD device address args , [default=]
--spec=SPEC
Subdevice of UHD device where appropriate
-A ANTENNA, --antenna=ANTENNA
select Rx Antenna where appropriate
-s SAMP_RATE, --samp-rate=SAMP_RATE
set sample rate (bandwidth) [default=1000000.0]
-g GAIN, --gain=GAIN
set gain in dB (default is midpoint)
-f FREQ, --tx-freq=FREQ
Set carrier frequency to FREQ [default=mid-point]
-x WAVEFORM_FREQ, --waveform-freq=WAVEFORM_FREQ
Set baseband waveform frequency to FREQ [default=0]
-y WAVEFORM2_FREQ, --waveform2-freq=WAVEFORM2_FREQ
Set 2nd waveform frequency to FREQ [default=none]
--sine Generate a carrier modulated by a complex sine wave
--const
Generate a constant carrier
--offset=OFFSET
Set waveform phase offset to OFFSET [default=0]
--gaussian
Generate Gaussian random output
--uniform
Generate Uniform random output
--2tone
Generate Two Tone signal for IMD testing
--sweep
Generate a swept sine wave
--amplitude=AMPL
Set output amplitude to AMPL (0.0-1.0) [default=0.15]
-v, --verbose
Use verbose console output [default=False]
Use uhd_siggen_gui online using onworks.net services
