This is the command lsconv that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
lsconv - a program does Log Sweep convolution.
SYNOPSIS
lsconv [parameters] sweepfile inversefile
Usage: lsconv sweepfile inversefile outfile [refsweep mingain [dlstart]]
Example: lsconv sweep.pcm inverse.pcm impulse.pcm refchannel.pcm 0.1 0.8
DESCRIPTION
This manual page documents briefly the lsconv program. This manual page was written for
the Debian distribution because the original program does not have a manual page.
lsconv is program to perform accurate time aligned impulse response measurements.
lsconv is based on the log sweep method for impulse response measurement, which is one of
the most accurate, especially for acoustic measurements. This method is based on a special
signal, which is a logarithmic sinusoidal sweep, that need to be reproduced through the
system under test, and an inverse filter, which, when convolved with the measured log
sweep, gives back the impulse response of the system.
Files used by lsconv must be in the raw 32 bit floating point format. Use for e.g. sox
program for converting if needed.
PARAMETERS
sweepfile: sweep file name
inversefile: inverse sweep file name
outfile: output impulse response file
refsweep: reference channel sweep file name
mingain: min gain for reference channel inversion
dlstart: dip limiting start for reference channel inversion
Refer to html documentation for more details.
Use lsconv online using onworks.net services
