This is the command 0xFFFF that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
0xFFFF - Open Free Fiasco Firmware Flasher, version 0.6.1
SYNOPSIS
0xFFFF [options]
DESCRIPTION
0xFFFF is Open Free Fiasco Firmware Flasher for Maemo devices. It support generating and
unpacking FIASCO images on local computer. Useful for editing Maemo firmware package for
future flash. It support via USB flashing any image type to Maemo device and also "cold"
flashing which means flashing dead device with erased bootloader. There is support for
booting kernel via USB without flashing to NAND and also changing configuration of Maemo
device (enable/disable R&D mode, changing HW revision strings, ...).
0xFFFF is alternative tool to proprietary Nokia flasher-3.5 and fiasco-gen. 0xFFFF
generate compatible FIASCO images and also accept FIASCO images generated by Nokia fiasco-
gen.
Operations:
-b [cmdline]
boot default or loaded kernel (default: no cmdline)
-b update
boot default or loaded kernel to Update mode
-r reboot device
-l load kernel and initfs images to RAM
-f flash all specified images
-c cold flash 2nd and secondary images
-x [/dev/mtd]
check for bad blocks on mtd device (default: all)
-E file
dump all device images to one fiasco image
-e [dir]
dump all device images (or one -t) to directory (default: current)
Device configuration:
-I identify, show all information about device
-D 0|1|2
change root device: 0 - flash, 1 - mmc, 2 - usb
-U 0|1 disable/enable USB host mode
-R 0|1 disable/enable R&D mode
-F flags
change R&D flags, flags are comma separated list, can be empty
-H rev change HW revision
-N ver change NOLO version string
-K ver change kernel version string
-T ver change initfs version string
-S ver change SW release version string
-C ver change content eMMC version string
Input image specification:
-M file
specify fiasco image
-m arg specify normal image
arg is [[[dev:[hw:]]ver:]type:]file[%lay]
dev is device name string (default: empty)
hw are comma separated list of HW revisions (default: empty)
ver is image version string (default: empty)
type is image type (default: autodetect)
file is image file name
lay is layout file name (default: none)
Image filters:
-t type
filter images by type
-d dev filter images by device
-w hw filter images by HW revision
Fiasco image:
-u [dir]
unpack fiasco image to directory (default: current)
-g file[%sw]
generate fiasco image with SW rel version (default: no version)
Other options:
-i identify images
-s simulate, do not flash or write on disk
-n disable hash, checksum and image type checking
-v be verbose and noisy
-h show this help message
R&D flags:
no-omap-wd
disable auto reboot by OMAP watchdog
no-ext-wd
disable auto reboot by external watchdog
no-lifeguard-reset
disable auto reboot by software lifeguard
serial-console
enable serial console
no-usb-timeout
disable usb timeout for flashing
sti-console
enable sti console
no-charging
disable battery charging
force-power-key
force omap boot reason to power key
Supported devices:
SU-18 Nokia 770
RX-34 Nokia N800
RX-44 Nokia N810
RX-48 Nokia N810 Wimax
RX-51 Nokia N900
Supported image types:
xloader
2nd
secondary
kernel
initfs
rootfs
mmc
cmt-2nd
cmt-algo
cmt-mcusw
Supported connection protocols:
Local on device
NOLO via USB
Cold flashing via USB
EXAMPLES
Via USB:
Identify device:
$ 0xFFFF -I
Load kernel & initfs and boot it with cmdline:
$ 0xFFFF -m initfs:<file> -m kernel:<file> -l -b "<cmdline>"
Flash kernel and reboot:
$ 0xFFFF -m kernel:<file> -f -r
Flash FIASCO image and reboot:
$ 0xFFFF -M <file> -f -r
Flash only kernel from FIASCO image and reboot:
$ 0xFFFF -M <file> -t kernel -f -r
Cold-Flash 2nd and secondary bootloaders:
$ 0xFFFF -m 2nd:<file> -m secondary:<file> -c
On device (need nanddump from mtd-utils):
Dump all images to current directory:
$ 0xFFFF -e
Dump all images to one FIASCO file:
$ 0xFFFF -E <file>
FIASCO packaging:
Show FIASCO image content:
$ 0xFFFF -M <file> -i
Unpack FIASCO image to current directory:
$ 0xFFFF -M <file> -u
Generate new FIASCO image image.fiasco from files xloader.bin, nolo.bin, zImage, rootfs
and append device&version information (xloader for RX-51 hw revision: 2101 and 2102,
version 1.0)
$ 0xFFFF -m RX-51:2101,2102:1.0:xloader:xloader.bin -m RX-51:2101,2102:1.0:secondary:nolo.bin -m 2.6.28:kernel:zImage -m rootfs -g image.fiasco
Use 0xFFFF online using onworks.net services