EnglishFrenchSpanish

OnWorks favicon

bsd-csh - Online in the Cloud

Run bsd-csh in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command bsd-csh that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


csh — a shell (command interpreter) with C-like syntax

SYNOPSIS


csh [-bcefimnstVvXx] [argument ...]
csh [-l]

DESCRIPTION


csh is a command language interpreter incorporating a history mechanism (see History
substitutions), job control facilities (see Jobs), interactive file name and user name
completion (see File name completion), and a C-like syntax. It is used both as an
interactive login shell and a shell script command processor.

Argument list processing
If the first argument (argument 0) to the shell is a dash (‘-’), then this is a login shell.
A login shell also can be specified by invoking the shell with the -l flag as the only
argument.

The rest of the flag arguments are interpreted as follows:

-b This flag forces a “break” from option processing, causing any further shell
arguments to be treated as non-option arguments. The remaining arguments will not be
interpreted as shell options. This may be used to pass options to a shell script
without confusion or possible subterfuge. The shell will not run a set-user-ID
script without this option.

-c Commands are read from the (single) following argument which must be present. Any
remaining arguments are placed in argv.

-e The shell exits if any invoked command terminates abnormally or yields a non-zero
exit status.

-f The shell will start faster, because it will neither search for nor execute commands
from the file .cshrc in the invoker's home directory. Note: if the environment
variable HOME is not set, fast startup is the default.

-i The shell is interactive and prompts for its top-level input, even if it appears not
to be a terminal. Shells are interactive without this option if their inputs and
outputs are terminals.

-l The shell is a login shell (only applicable if -l is the only flag specified).

-m Read .cshrc, regardless of its owner and group. This option is dangerous and should
only be used by su(1).

-n Commands are parsed, but not executed. This aids in syntactic checking of shell
scripts. When used interactively, the shell can be terminated by pressing control-D
(end-of-file character), since exit will not work.

-s Command input is taken from the standard input.

-t A single line of input is read and executed. A backslash (‘\’) may be used to escape
the newline at the end of this line and continue onto another line.

-V Causes the verbose variable to be set even before .cshrc is executed.

-v Causes the verbose variable to be set, with the effect that command input is echoed
after history substitution.

-X Causes the echo variable to be set even before .cshrc is executed.

-x Causes the echo variable to be set, so that commands are echoed immediately before
execution.

After processing of flag arguments, if arguments remain but none of the -c, -i, -s, or -t
options were given, the first argument is taken as the name of a file of commands to be
executed. The shell opens this file, and saves its name for possible resubstitution by
‘$0’. Since many systems use either the standard version 6 or version 7 shells whose shell
scripts are not compatible with this shell, the shell will execute such a “standard” shell
if the first character of a script is not a hash mark (‘#’); i.e., if the script does not
start with a comment. Remaining arguments initialize the variable argv.

An instance of csh begins by executing commands from the file /etc/csh.cshrc and, if this is
a login shell, /etc/csh.login. It then executes commands from .cshrc in the home directory
of the invoker, and, if this is a login shell, the file .login in the same location. It is
typical for users on CRTs to put the command stty crt in their .login file, and to also
invoke tset(1) there.

In the normal case, the shell will begin reading commands from the terminal, prompting with
‘% .’ Processing of arguments and the use of the shell to process files containing command
scripts will be described later.

The shell repeatedly performs the following actions: a line of command input is read and
broken into “words”. This sequence of words is placed on the command history list and
parsed. Finally each command in the current line is executed.

When a login shell terminates it executes commands from the files .logout in the user's home
directory and /etc/csh.logout.

Lexical structure
The shell splits input lines into words at blanks and tabs with the following exceptions.
The characters ‘&’, ‘|’, ‘;’, ‘<’, ‘>’, ‘(’, and ‘)’ form separate words. If doubled in
‘&&’, ‘||’, ‘<<’, or ‘>>’, these pairs form single words. These parser metacharacters may
be made part of other words, or have their special meaning prevented, by preceding them with
a backslash (‘\’). A newline preceded by a ‘\’ is equivalent to a blank.

Strings enclosed in matched pairs of quotations, ‘'’, ‘`’, or ‘"’, form parts of a word;
metacharacters in these strings, including blanks and tabs, do not form separate words.
These quotations have semantics to be described later. Within pairs of ‘'’ or ‘"’
characters, a newline preceded by a ‘\’ gives a true newline character.

When the shell's input is not a terminal, the character ‘#’ introduces a comment that
continues to the end of the input line. This special meaning is prevented when preceded by
‘\’ and in quotations using ‘`’, ‘'’, and ‘"’.

Commands
A simple command is a sequence of words, the first of which specifies the command to be
executed. A simple command or a sequence of simple commands separated by ‘|’ characters
forms a pipeline. The output of each command in a pipeline is connected to the input of the
next. Sequences of pipelines may be separated by ‘;’, and are then executed sequentially.
A sequence of pipelines may be executed without immediately waiting for it to terminate by
following it with a ‘&’.

Any of the above may be placed in ‘(’ ‘)’ to form a simple command (that may be a component
of a pipeline, for example). It is also possible to separate pipelines with ‘||’ or ‘&&’
showing, as in the C language, that the second is to be executed only if the first fails or
succeeds, respectively. (See Expressions.)

Jobs
The shell associates a job with each pipeline. It keeps a table of current jobs, printed by
the jobs command, and assigns them small integer numbers. When a job is started
asynchronously with ‘&’, the shell prints a line that looks like:

[1] 1234

showing that the job which was started asynchronously was job number 1 and had one (top-
level) process, whose process ID was 1234.

If you are running a job and wish to do something else you may hit ^Z (control-Z), which
sends a SIGSTOP signal to the current job. The shell will then normally show that the job
has been “Stopped”, and print another prompt. You can then manipulate the state of this
job, putting it in the background with the bg command, or run some other commands and
eventually bring the job back into the foreground with the fg command. A ^Z takes effect
immediately and is like an interrupt in that pending output and unread input are discarded
when it is typed. There is another special key ^Y that does not generate a SIGSTOP signal
until a program attempts to read(2) it. This request can usefully be typed ahead when you
have prepared some commands for a job that you wish to stop after it has read them.

A job being run in the background will stop if it tries to read from the terminal.
Background jobs are normally allowed to produce output, but this can be disabled by giving
the command stty tostop. If you set this tty option, then background jobs will stop when
they try to produce output like they do when they try to read input.

There are several ways to refer to jobs in the shell. The character ‘%’ introduces a job
name. If you wish to refer to job number 1, you can name it as ‘%1’. Just naming a job
brings it to the foreground; thus %1 is a synonym for fg %1, bringing job number 1 back into
the foreground. Similarly, saying %1 & resumes job number 1 in the background. Jobs can
also be named by prefixes of the string typed in to start them, if these prefixes are
unambiguous; thus %ex would normally restart a suspended ex(1) job, if there were only one
suspended job whose name began with the string "ex". It is also possible to say %?string,
which specifies a job whose text contains string, if there is only one such job.

The shell maintains a notion of the current and previous jobs. In output about jobs, the
current job is marked with a ‘+’ and the previous job with a ‘-’. The abbreviation ‘%+’
refers to the current job and ‘%-’ refers to the previous job. For close analogy with the
syntax of the history mechanism (described below), ‘%%’ is also a synonym for the current
job.

The job control mechanism requires that the stty(1) option new be set. It is an artifact
from a new implementation of the tty driver that allows generation of interrupt characters
from the keyboard to tell jobs to stop. See stty(1) for details on setting options in the
new tty driver.

Status reporting
The shell learns immediately whenever a process changes state. It normally informs you
whenever a job becomes blocked so that no further progress is possible, but only just before
it prints a prompt. This is done so that it does not otherwise disturb your work. If,
however, you set the shell variable notify, the shell will notify you immediately of changes
of status in background jobs. There is also a shell command notify that marks a single
process so that its status changes will be immediately reported. By default notify marks
the current process; simply say notify after starting a background job to mark it.

When you try to leave the shell while jobs are stopped, you will be warned that “You have
stopped jobs”. You may use the jobs command to see what they are. If you try to exit again
immediately, the shell will not warn you a second time, and the suspended jobs will be
terminated.

File name completion
When the file name completion feature is enabled by setting the shell variable filec (see
set), csh will interactively complete file names and user names from unique prefixes when
they are input from the terminal followed by the escape character (the escape key, or
control-[). For example, if the current directory looks like

DSC.OLD bin cmd lib xmpl.c
DSC.NEW chaosnet cmtest mail xmpl.o
bench class dev mbox xmpl.out

and the input is

% vi ch<escape>

csh will complete the prefix “ch” to the only matching file name “chaosnet”, changing the
input line to

% vi chaosnet

However, given

% vi D<escape>

csh will only expand the input to

% vi DSC.

and will sound the terminal bell to indicate that the expansion is incomplete, since there
are two file names matching the prefix ‘D’.

If a partial file name is followed by the end-of-file character (usually control-D), then,
instead of completing the name, csh will list all file names matching the prefix. For
example, the input

% vi D<control-D>

causes all files beginning with ‘D’ to be listed:

DSC.NEW DSC.OLD

while the input line remains unchanged.

The same system of escape and end-of-file can also be used to expand partial user names, if
the word to be completed (or listed) begins with the tilde character (‘~’). For example,
typing

cd ~ro<escape>

may produce the expansion

cd ~root

The use of the terminal bell to signal errors or multiple matches can be inhibited by
setting the variable nobeep.

Normally, all files in the particular directory are candidates for name completion. Files
with certain suffixes can be excluded from consideration by setting the variable fignore to
the list of suffixes to be ignored. Thus, if fignore is set by the command

% set fignore = (.o .out)

then typing

% vi x<escape>

would result in the completion to

% vi xmpl.c

ignoring the files "xmpl.o" and "xmpl.out". However, if the only completion possible
requires not ignoring these suffixes, then they are not ignored. In addition, fignore does
not affect the listing of file names by control-D. All files are listed regardless of their
suffixes.

Substitutions
We now describe the various transformations the shell performs on the input in the order in
which they occur.

History substitutions
History substitutions place words from previous command input as portions of new commands,
making it easy to repeat commands, repeat arguments of a previous command in the current
command, or fix spelling mistakes in the previous command with little typing and a high
degree of confidence. History substitutions begin with the character ‘!’ and may begin
anywhere in the input stream (with the proviso that they do not nest). This ‘!’ may be
preceded by a ‘\’ to prevent its special meaning; for convenience, a ‘!’ character is passed
unchanged when it is followed by a blank, tab, newline, ‘=’ or ‘(’. (History substitutions
also occur when an input line begins with ‘^’. This special abbreviation will be described
later.) Any input line that contains history substitution is echoed on the terminal before
it is executed as it would have been typed without history substitution.

Commands input from the terminal that consist of one or more words are saved on the history
list. The history substitutions reintroduce sequences of words from these saved commands
into the input stream. The size of the history list is controlled by the history variable;
the previous command is always retained, regardless of the value of the history variable.
Commands are numbered sequentially from 1.

For definiteness, consider the following output from the history command:

09 write michael
10 ex write.c
11 cat oldwrite.c
12 diff *write.c

The commands are shown with their event numbers. It is not usually necessary to use event
numbers, but the current event number can be made part of the prompt by placing a ‘!’ in the
prompt string.

With the current event 13 we can refer to previous events by event number ‘!11’, relatively
as in ‘!-2’ (referring to the same event), by a prefix of a command word as in ‘!d’ for
event 12 or ‘!wri’ for event 9, or by a string contained in a word in the command as in
‘!?mic?’ also referring to event 9. These forms, without further change, simply reintroduce
the words of the specified events, each separated by a single blank. As a special case,
‘!!’ refers to the previous command; thus ‘!!’ alone is a redo.

To select words from an event we can follow the event specification by a ‘:’ and a
designator for the desired words. The words of an input line are numbered from 0, the first
(usually command) word being 0, the second word (first argument) being 1, etc. The basic
word designators are:

0 first (command) word
n n'th argument
^ first argument; i.e., ‘1’
$ last argument
% word matched by (immediately preceding) ?s? search
x-y range of words
-y abbreviates ‘0-y’
* abbreviates ‘^-$’, or nothing if only 1 word in event
x* abbreviates ‘x-$’
x- like ‘x*’ but omitting word ‘$’

The ‘:’ separating the event specification from the word designator can be omitted if the
argument selector begins with a ‘^’, ‘$’, ‘*’, ‘-’, or ‘%’. After the optional word
designator, a sequence of modifiers can be placed, each preceded by a ‘:’. The following
modifiers are defined:

h Remove a trailing pathname component, leaving the head.
r Remove a trailing ‘.xxx’ component, leaving the root name.
e Remove all but the extension ‘.xxx’ part.
s/l/r/ Substitute l for r.
t Remove all leading pathname components, leaving the tail.
& Repeat the previous substitution.
g Apply the change once on each word, prefixing the above; e.g., ‘g&’.
a Apply the change as many times as possible on a single word, prefixing the
above. It can be used together with ‘g’ to apply a substitution globally.
p Print the new command line but do not execute it.
q Quote the substituted words, preventing further substitutions.
x Like ‘q’, but break into words at blanks, tabs, and newlines.

Unless preceded by a ‘g’ the change is applied only to the first modifiable word. With
substitutions, it is an error for no word to be applicable.

The left-hand side of substitutions are not regular expressions in the sense of the editors,
but instead strings. Any character may be used as the delimiter in place of ‘/’; a ‘\’
quotes the delimiter into the l and r strings. The character ‘&’ in the right-hand side
is replaced by the text from the left. A ‘\’ also quotes ‘&’. A NULL l (‘//’) uses the
previous string either from an l or from a contextual scan string s in ‘!?s\?’. The
trailing delimiter in the substitution may be omitted if a newline follows immediately as
may the trailing ‘?’ in a contextual scan.

A history reference may be given without an event specification; e.g., ‘!$’. Here, the
reference is to the previous command unless a previous history reference occurred on the
same line in which case this form repeats the previous reference. Thus “!?foo?^ !$” gives
the first and last arguments from the command matching “?foo?”.

A special abbreviation of a history reference occurs when the first non-blank character of
an input line is a ‘^’. This is equivalent to “!:s^” providing a convenient shorthand for
substitutions on the text of the previous line. Thus ^lb^lib fixes the spelling of “lib” in
the previous command. Finally, a history substitution may be surrounded with ‘{’ and ‘}’ if
necessary to insulate it from the characters that follow. Thus, after ls -ld ~paul we might
do !{l}a to do ls -ld ~paula, while !la would look for a command starting with “la”.

Quotations with ´ and "
The quotation of strings by ‘'’ and ‘"’ can be used to prevent all or some of the remaining
substitutions. Strings enclosed in ‘'’ are prevented from any further interpretation.
Strings enclosed in ‘"’ may be expanded as described below.

In both cases the resulting text becomes (all or part of) a single word; only in one special
case (see Command Substitution below) does a ‘"’ quoted string yield parts of more than one
word; ‘'’ quoted strings never do.

Alias substitution
The shell maintains a list of aliases that can be established, displayed and modified by the
alias and unalias commands. After a command line is scanned, it is parsed into distinct
commands and the first word of each command, left-to-right, is checked to see if it has an
alias. If it does, then the text that is the alias for that command is reread with the
history mechanism available as though that command were the previous input line. The
resulting words replace the command and argument list. If no reference is made to the
history list, then the argument list is left unchanged.

Thus if the alias for “ls” is “ls -l”, the command ls /usr would map to ls -l /usr, the
argument list here being undisturbed. Similarly, if the alias for “lookup” was “grep !^
/etc/passwd” then lookup bill would map to grep bill /etc/passwd.

If an alias is found, the word transformation of the input text is performed and the
aliasing process begins again on the reformed input line. Looping is prevented if the first
word of the new text is the same as the old by flagging it to prevent further aliasing.
Other loops are detected and cause an error.

Note that the mechanism allows aliases to introduce parser metasyntax. Thus, we can alias
print 'pr \!* | lpr' to make a command that pr's its arguments to the line printer.

Variable substitution
The shell maintains a set of variables, each of which has as value a list of zero or more
words. Some of these variables are set by the shell or referred to by it. For instance,
the argv variable is an image of the shell's argument list, and words of this variable's
value are referred to in special ways.

The values of variables may be displayed and changed by using the set and unset commands.
Of the variables referred to by the shell a number are toggles; the shell does not care what
their value is, only whether they are set or not. For instance, the verbose variable is a
toggle that causes command input to be echoed. The setting of this variable results from
the -v command-line option.

Other operations treat variables numerically. The @ command permits numeric calculations to
be performed and the result assigned to a variable. Variable values are, however, always
represented as (zero or more) strings. For the purposes of numeric operations, the null
string is considered to be zero, and the second and additional words of multiword values are
ignored.

After the input line is aliased and parsed, and before each command is executed, variable
substitution is performed, keyed by ‘$’ characters. This expansion can be prevented by
preceding the ‘$’ with a ‘\’ except within double quotes (`"'), where it always occurs, and
within single quotes (`''), where it never occurs. Strings quoted by backticks (` `) are
interpreted later (see Command substitution below), so ‘$’ substitution does not occur there
until later, if at all. A ‘$’ is passed unchanged if followed by a blank, tab, or end-of-
line.

Input/output redirections are recognized before variable expansion, and are variable
expanded separately. Otherwise, the command name and entire argument list are expanded
together. It is thus possible for the first (command) word (to this point) to generate more
than one word, the first of which becomes the command name, and the rest of which become
arguments.

Unless enclosed in ‘"’ or given the ‘:q’ modifier, the results of variable substitution may
eventually be command and filename substituted. Within ‘"’, a variable whose value consists
of multiple words expands to (a portion of) a single word, with the words of the variable's
value separated by blanks. When the ‘:q’ modifier is applied to a substitution the variable
will expand to multiple words with each word separated by a blank and quoted to prevent
later command or filename substitution.

The following metasequences are provided for introducing variable values into the shell
input. Except as noted, it is an error to reference a variable that is not set.

$name
${name}
Are replaced by the words of the value of variable name, each separated by a
blank. Braces insulate name from following characters that would otherwise be
part of it. Shell variables have names consisting of up to 20 letters and
digits starting with a letter. The underscore character is considered a
letter. If name is not a shell variable, but is set in the environment, then
that value is returned (but ‘:’ modifiers and the other forms given below are
not available here).
$name[selector]
${name[selector]}
May be used to select only some of the words from the value of name. The
selector is subjected to ‘$’ substitution and may consist of a single number
or two numbers separated by a ‘-’. The first word of a variable's value is
numbered ‘1’. If the first number of a range is omitted it defaults to ‘1’.
If the last number of a range is omitted it defaults to ‘$#name’. The
selector ‘*’ selects all words. It is not an error for a range to be empty if
the second argument is omitted or in range.
$#name
${#name}
Gives the number of words in the variable. This is useful for later use in a
“$argv[selector]”.
$0 Substitutes the name of the file from which command input is being read. An
error occurs if the name is not known.
$number
${number}
Equivalent to “$argv[number]”.
$* Equivalent to “$argv[*]”.

The modifiers ‘:e’, ‘:h’, ‘:t’, ‘:r’, ‘:q’, and ‘:x’ may be applied to the substitutions
above as may ‘:gh’, ‘:gt’, and ‘:gr’. If braces ‘{’ ‘}’ appear in the command form then the
modifiers must appear within the braces. The current implementation allows only one ‘:’
modifier on each ‘$’ expansion.

The following substitutions may not be modified with ‘:’ modifiers.
$?name
${?name}
Substitutes the string “1” if name is set, “0” if it is not.
$?0 Substitutes ‘1’ if the current input filename is known, ‘0’ if it is not.
$$ Substitute the (decimal) process number of the (parent) shell. Do NOT use
this mechanism for generating temporary file names; see mktemp(1) instead.
$! Substitute the (decimal) process number of the last background process started
by this shell.
$< Substitutes a line from the standard input, with no further interpretation.
It can be used to read from the keyboard in a shell script.

Command and filename substitution
The remaining substitutions, command and filename substitution, are applied selectively to
the arguments of built-in commands. By selectively, we mean that portions of expressions
which are not evaluated are not subjected to these expansions. For commands that are not
internal to the shell, the command name is substituted separately from the argument list.
This occurs very late, after input-output redirection is performed, and in a child of the
main shell.

Command substitution
Command substitution is shown by a command enclosed in ‘`’. The output from such a command
is normally broken into separate words at blanks, tabs, and newlines, with null words being
discarded; this text then replaces the original string. Within double quotes (`"'), only
newlines force new words; blanks and tabs are preserved.

In any case, the single final newline does not force a new word. Note that it is thus
possible for a command substitution to yield only part of a word, even if the command
outputs a complete line.

Filename substitution
If a word contains any of the characters ‘*’, ‘?’, ‘[’, or ‘{’, or begins with the character
‘~’, then that word is a candidate for filename substitution, also known as “globbing”.
This word is then regarded as a pattern, and replaced with an alphabetically sorted list of
file names that match the pattern. In a list of words specifying filename substitution it
is an error for no pattern to match an existing file name, but it is not required for each
pattern to match. Only the metacharacters ‘*’, ‘?’, and ‘[’ imply pattern matching, the
characters ‘~’ and ‘{’ being more akin to abbreviations.

In matching filenames, the character ‘.’ at the beginning of a filename or immediately
following a ‘/’, as well as the character ‘/’ must be matched explicitly. The character ‘*’
matches any string of characters, including the null string. The character ‘?’ matches any
single character.

The sequence “[...]” matches any one of the characters enclosed. Within “[...]”, a pair of
characters separated by ‘-’ matches any character lexically between the two (inclusive).
Within “[...]”, the name of a character class enclosed in ‘[:’ and ‘:]’ stands for the list
of all characters belonging to that class. Supported character classes:

alnum cntrl lower space
alpha digit print upper
blank graph punct xdigit

These match characters using the macros specified in ctype(3). A character class may not be
used as an endpoint of a range.

The character ‘~’ at the beginning of a filename refers to home directories. Standing
alone, i.e., ‘~’, it expands to the invoker's home directory as reflected in the value of
the variable home. When followed by a name consisting of letters, digits, and ‘-’
characters, the shell searches for a user with that name and substitutes their home
directory; thus “~ken” might expand to “/usr/ken” and “~ken/chmach” to “/usr/ken/chmach”.
If the character ‘~’ is followed by a character other than a letter or ‘/’, or does not
appear at the beginning of a word, it is left undisturbed.

The metanotation “a{b,c,d}e” is a shorthand for “abe ace ade”. Left to right order is
preserved, with results of matches being sorted separately at a low level to preserve this
order. This construct may be nested. Thus, “~source/s1/{oldls,ls}.c” expands to
“/usr/source/s1/oldls.c /usr/source/s1/ls.c” without chance of error if the home directory
for “source” is “/usr/source”. Similarly “../{memo,*box}” might expand to “../memo ../box
../mbox”. (Note that “memo” was not sorted with the results of the match to “*box”.) As a
special case ‘{’, ‘}’, and ‘{}’ are passed undisturbed.

Input/output
The standard input and the standard output of a command may be redirected with the following
syntax:

< name Open file name (which is first variable, command, and filename expanded) as
the standard input.
<< word
Read the shell input up to a line that is identical to word. word is not
subjected to variable, command, or filename substitution, and each input line
is compared to word before any substitutions are done on the input line.
Unless a quoting ‘\’, ‘"’, ‘'’ or ‘`’ appears in word, variable and command
substitution is performed on the intervening lines, allowing ‘\’ to quote ‘$’,
‘\’ and ‘`’. Commands that are substituted have all blanks, tabs, and
newlines preserved, except for the final newline which is dropped. The
resultant text is placed in an anonymous temporary file that is given to the
command as its standard input.
> name
>! name
>& name
>&! name
The file name is used as the standard output. If the file does not exist then
it is created; if the file exists, it is truncated; its previous contents are
lost.

If the variable noclobber is set, then the file must not exist or be a
character special file (e.g., a terminal or /dev/null) or an error results.
This helps prevent accidental destruction of files. Here, the ‘!’ forms can
be used to suppress this check.

The forms involving ‘&’ route the standard error output into the specified
file as well as the standard output. name is expanded in the same way as ‘<’
input filenames are.
>> name
>>& name
>>! name
>>&! name
Uses file name as the standard output; like ‘>’ but places output at the end
of the file. If the variable noclobber is set, then it is an error for the
file not to exist unless one of the ‘!’ forms is given. Otherwise similar to
‘>’.

A command receives the environment in which the shell was invoked as modified by the input-
output parameters and the presence of the command in a pipeline. Thus, unlike some previous
shells, commands run from a file of shell commands have no access to the text of the
commands by default; instead they receive the original standard input of the shell. The
‘<<’ mechanism should be used to present inline data. This permits shell command scripts to
function as components of pipelines and allows the shell to block read its input. Note that
the default standard input for a command run detached is not modified to be the empty file
/dev/null; instead the standard input remains as the original standard input of the shell.
If this is a terminal and if the process attempts to read from the terminal, then the
process will block and the user will be notified (see Jobs above).

The standard error output may be directed through a pipe with the standard output. Simply
use the form ‘|&’ instead of just ‘|’.

Expressions
Several of the built-in commands (to be described later) take expressions, in which the
operators are similar to those of C, with the same precedence, but with the opposite
grouping: right to left. These expressions appear in the @, exit, if, and while commands.
The following operators are available:

|| && | ↑ & == != =~ !~ <= >= < > << >> + - * / % ! ~ ( )

Here the precedence increases to the right, ‘==’ ‘!=’ ‘=~’ and ‘!~’, ‘<=’ ‘>=’ ‘<’ and ‘>’,
‘<<’ and ‘>>’, ‘+’ and ‘-’, ‘*’ ‘/’ and ‘%’ being, in groups, at the same level. The ‘==’
‘!=’ ‘=~’ and ‘!~’ operators compare their arguments as strings; all others operate on
numbers. The operators ‘=~’ and ‘!~’ are like ‘!=’ and ‘==’ except that the right hand side
is a pattern (containing, e.g., *'s, ?'s, and instances of “[...]”) against which the left-
hand operand is matched. This reduces the need for use of the switch statement in shell
scripts when all that is really needed is pattern matching.

Strings that begin with ‘0’ are considered octal numbers. Null or missing arguments are
considered ‘0’. The results of all expressions are strings, which represent decimal
numbers. It is important to note that no two components of an expression can appear in the
same word; except when adjacent to components of expressions that are syntactically
significant to the parser (‘&’, ‘|’, ‘<’, ‘>’, ‘(’, and ‘)’), they should be surrounded by
spaces.

Also available in expressions as primitive operands are command executions enclosed in ‘{’
and ‘}’ and file enquiries of the form -l name where l is one of:

r read access
w write access
x execute access
e existence
o ownership
z zero size
f plain file
d directory

The specified name is command and filename expanded and then tested to see if it has the
specified relationship to the real user. If the file does not exist or is inaccessible then
all enquiries return false, i.e., ‘0’. Command executions succeed, returning true, i.e.,
‘1’, if the command exits with status 0, otherwise they fail, returning false, i.e., ‘0’.
If more detailed status information is required then the command should be executed outside
an expression and the variable status examined.

Control flow
The shell contains several commands that can be used to regulate the flow of control in
command files (shell scripts) and (in limited but useful ways) from terminal input. These
commands all operate by forcing the shell to reread or skip in its input and, because of the
implementation, restrict the placement of some of the commands.

The foreach, switch, and while statements, as well as the if-then-else form of the if
statement require that the major keywords appear in a single simple command on an input line
as shown below.

If the shell's input is not seekable, the shell buffers up input whenever a loop is being
read and performs seeks in this internal buffer to accomplish the rereading implied by the
loop. (To the extent that this allows, backward goto's will succeed on non-seekable
inputs.)

Built-in commands
Built-in commands are executed within the shell. If a built-in command occurs as any
component of a pipeline except the last then it is executed in a sub-shell.

alias
alias name
alias name wordlist
The first form prints all aliases. The second form prints the alias for name.
The final form assigns the specified wordlist as the alias of name; wordlist
is command and filename substituted. name is not allowed to be “alias” or
“unalias”.

alloc Shows the amount of dynamic memory acquired, broken down into used and free
memory. With an argument shows the number of free and used blocks in each
size category. The categories start at size 8 and double at each step. This
command's output may vary across system types, since systems other than the
VAX may use a different memory allocator.

bg
bg %job ...
Puts the current or specified jobs into the background, continuing them if
they were stopped.

break Causes execution to resume after the end of the nearest enclosing foreach or
while. The remaining commands on the current line are executed. Multi-level
breaks are thus possible by writing them all on one line.

breaksw
Causes a break from a switch, resuming after the endsw.

case label:
A label in a switch statement as discussed below.

cd
cd name
chdir
chdir name
Change the shell's working directory to directory name. If no argument is
given then change to the home directory of the user. If name is not found as
a subdirectory of the current directory (and does not begin with ‘/’, ‘./’ or
‘../’), then each component of the variable cdpath is checked to see if it has
a subdirectory name. Finally, if all else fails but name is a shell variable
whose value begins with ‘/’, then this is tried to see if it is a directory.

continue
Continue execution of the nearest enclosing while or foreach. The rest of the
commands on the current line are executed.

default:
Labels the default case in a switch statement. The default should come after
all case labels.

dirs Prints the directory stack; the top of the stack is at the left, the first
directory in the stack being the current directory.

echo wordlist
echo -n wordlist
The specified words are written to the shell's standard output, separated by
spaces, and terminated with a newline unless the -n option is specified.

else
end
endif
endsw See the description of the foreach, if, switch, and while statements below.

eval arg ...
(As in sh(1).) The arguments are read as input to the shell and the resulting
command(s) executed in the context of the current shell. This is usually used
to execute commands generated as the result of command or variable
substitution, since parsing occurs before these substitutions. See tset(1)
for an example of using eval.

exec command
The specified command is executed in place of the current shell.

exit
exit (expr)
The shell exits either with the value of the status variable (first form) or
with the value of the specified expr (second form).

fg
fg %job ...
Brings the current or specified jobs into the foreground, continuing them if
they were stopped.

foreach name (wordlist)
...
end The variable name is successively set to each member of wordlist and the
sequence of commands between this command and the matching end are executed.
(Both foreach and end must appear alone on separate lines.) The built-in
command continue may be used to continue the loop prematurely and the built-in
command break to terminate it prematurely. When this command is read from the
terminal, the loop is read once prompting with ‘?’ before any statements in
the loop are executed. If you make a mistake typing in a loop at the terminal
you can rub it out.

glob wordlist
Like echo but no ‘\’ escapes are recognized and words are delimited by NUL
characters in the output. Useful for programs that wish to use the shell to
filename expand a list of words.

goto word
The specified word is filename and command expanded to yield a string of the
form ‘label’. The shell rewinds its input as much as possible and searches
for a line of the form “label:”, possibly preceded by blanks or tabs.
Execution continues after the specified line.

hashstat
Print a statistics line showing how effective the internal hash table has been
at locating commands (and avoiding exec´s). An exec is attempted for each
component of the path where the hash function indicates a possible hit, and in
each component that does not begin with a ‘/’.

history
history n
history -h n
history -r n
Displays the history event list; if n is given, only the n most recent events
are printed. The -h option causes the history list to be printed without
leading numbers. This format produces files suitable for sourcing using the
-h option to source. The -r option reverses the order of printout to be most
recent first instead of oldest first.

if (expr) command
If the specified expression evaluates to true, then the single command with
arguments is executed. Variable substitution on command happens early, at the
same time it does for the rest of the if command. command must be a simple
command, not a pipeline, a command list, or a parenthesized command list.
Input/output redirection occurs even if expr is false, i.e., when command is
not executed (this is a bug).

if (expr) then
...
else if (expr2) then
...
else
...
endif If the specified expr is true then the commands up to the first else are
executed; otherwise if expr2 is true then the commands up to the second else
are executed, etc. Any number of else-if pairs are possible; only one endif
is needed. The else part is likewise optional. (The words else and endif
must appear at the beginning of input lines; the if must appear alone on its
input line or after an else.)

jobs
jobs -l
Lists the active jobs; the -l option lists process IDs in addition to the
normal information.

kill %job
kill [-s signal_name] pid
kill -sig pid ...
kill -l [exit_status]
Sends either the SIGTERM (terminate) signal or the specified signal to the
specified jobs or processes. Signals are either given by number or by names
(as given in ⟨signal.h⟩, stripped of the prefix “SIG”). The signal names are
listed by “kill -l”; if an exit_status is specified, only the corresponding
signal name will be written. There is no default; just saying “kill” does not
send a signal to the current job. If the signal being sent is SIGTERM
(terminate) or SIGHUP (hangup), then the job or process will be sent a SIGCONT
(continue) signal as well.

limit
limit resource
limit resource maximum-use
limit -h
limit -h resource
limit -h resource maximum-use
Limits the consumption by the current process and each process it creates to
not individually exceed maximum-use on the specified resource. If no
maximum-use is given, then the current limit is printed; if no resource is
given, then all limitations are given. If the -h flag is given, the hard
limits are used instead of the current limits. The hard limits impose a
ceiling on the values of the current limits. Only the superuser may raise the
hard limits, but a user may lower or raise the current limits within the legal
range.

Resources controllable currently include:

cputime the maximum number of CPU-seconds to be used by each process.

filesize the largest single file (in bytes) that can be created.

datasize the maximum growth of the data+stack region via sbrk(2) beyond
the end of the program text.

stacksize the maximum size of the automatically-extended stack region.

coredumpsize the size of the largest core dump (in bytes) that will be
created.

memoryuse the maximum size (in bytes) to which a process's resident set
size (RSS) may grow.

memorylocked The maximum size (in bytes) which a process may lock into memory
using the mlock(2) function.

maxproc The maximum number of simultaneous processes for this user ID.

openfiles The maximum number of simultaneous open files for this user ID.

vmemoryuse the maximum size (in bytes) to which a process's total size may
grow.

The maximum-use may be given as a (floating point or integer) number followed
by a scale factor. For all limits other than cputime the default scale is ‘k’
or “kilobytes” (1024 bytes); a scale factor of ‘m’ or “megabytes” may also be
used. For cputime the default scale is “seconds”; a scale factor of ‘m’ for
minutes or ‘h’ for hours, or a time of the form “mm:ss” giving minutes and
seconds also may be used.

For both resource names and scale factors, unambiguous prefixes of the names
suffice.

login Terminate a login shell, replacing it with an instance of /usr/bin/login.
This is one way to log off, included for compatibility with sh(1).

logout Terminate a login shell. Especially useful if ignoreeof is set.

nice
nice +number
nice command
nice +number command
The first form sets the scheduling priority for this shell to 4. The second
form sets the priority to the given number. The final two forms run command
at priority 4 and number respectively. The greater the number, the less CPU
the process will get. The superuser may specify negative priority by using
“nice -number ...”. command is always executed in a sub-shell, and the
restrictions placed on commands in simple if statements apply.

nohup
nohup command
The first form can be used in shell scripts to cause hangups to be ignored for
the remainder of the script. The second form causes the specified command to
be run with hangups ignored. All processes detached with ‘&’ are effectively
nohup´ed.

notify
notify %job ...
Causes the shell to notify the user asynchronously when the status of the
current or specified jobs change; normally notification is presented before a
prompt. This is automatic if the shell variable notify is set.

onintr
onintr -
onintr label
Control the action of the shell on interrupts. The first form restores the
default action of the shell on interrupts, which is to terminate shell scripts
or to return to the terminal command input level. The second form onintr -
causes all interrupts to be ignored. The final form causes the shell to
execute a goto label when an interrupt is received or a child process
terminates because it was interrupted.

In any case, if the shell is running detached and interrupts are being
ignored, all forms of onintr have no meaning and interrupts continue to be
ignored by the shell and all invoked commands. Finally, onintr statements are
ignored in the system startup files where interrupts are disabled
(/etc/csh.cshrc, /etc/csh.login).

popd
popd +n
Pops the directory stack, returning to the new top directory. With an
argument “+n” discards the n´th entry in the stack. The members of the
directory stack are numbered from the top starting at 0.

pushd
pushd name
pushd +n
With no arguments, pushd exchanges the top two elements of the directory
stack. Given a name argument, pushd changes to the new directory (ala cd) and
pushes the old current working directory (as in cwd) onto the directory stack.
With a numeric argument, pushd rotates the n´th argument of the directory
stack around to be the top element and changes to it. The members of the
directory stack are numbered from the top starting at 0.

rehash Causes the internal hash table of the contents of the directories in the path
variable to be recomputed. This is needed if new commands are added to
directories in the path while you are logged in. This should only be
necessary if you add commands to one of your own directories, or if a systems
programmer changes the contents of a system directory.

repeat count command
The specified command, which is subject to the same restrictions as the
command in the one line if statement above, is executed count times. I/O
redirections occur exactly once, even if count is 0.

set
set name
set name=word
set name[index]=word
set name=(wordlist)
The first form of the command shows the value of all shell variables.
Variables that have other than a single word as their value print as a
parenthesized word list. The second form sets name to the null string. The
third form sets name to the single word. The fourth form sets the index'th
component of name to word; this component must already exist. The final form
sets name to the list of words in wordlist. The value is always command and
filename expanded.

These arguments may be repeated to set multiple values in a single set
command. Note however, that variable expansion happens for all arguments
before any setting occurs.

setenv
setenv name
setenv name value
The first form lists all current environment variables. It is equivalent to
printenv(1). The last form sets the value of environment variable name to be
value, a single string. The second form sets name to an empty string. The
most commonly used environment variables USER, TERM, and PATH are
automatically imported to and exported from the csh variables user, term, and
path; there is no need to use setenv for these.

shift
shift variable
The members of argv are shifted to the left, discarding argv[1]. It is an
error for argv not to be set or to have less than one word as value. The
second form performs the same function on the specified variable.

source name
source -h name
The shell reads commands from name. source commands may be nested; if they
are nested too deeply the shell may run out of file descriptors. An error in
a source at any level terminates all nested source commands. Normally input
during source commands is not placed on the history list; the -h option causes
the commands to be placed on the history list without being executed.

stop
stop %job ...
Stops the current or specified jobs that are executing in the background.

suspend
Causes the shell to stop in its tracks, much as if it had been sent a stop
signal with ^Z. This is most often used to stop shells started by su(1).

switch (string)
case str1:
...
breaksw
...
default:
...
breaksw
endsw Each case label is successively matched against the specified string, which is
first command and filename expanded. The file metacharacters ‘*’, ‘?’ and
“[...]” may be used in the case labels, which are variable expanded. If none
of the labels match before the “default” label is found, then the execution
begins after the default label. Each case label and the default label must
appear at the beginning of a line. The command breaksw causes execution to
continue after the endsw. Otherwise control may fall through case labels and
the default label as in C. If no label matches and there is no default,
execution continues after the endsw.

time
time command
With no argument, a summary of time used by this shell and its children is
printed. If arguments are given the specified simple command is timed and a
time summary as described under the time variable is printed. If necessary,
an extra shell is created to print the time statistic when the command
completes.

umask
umask value
The file creation mask is displayed (first form) or set to the specified value
(second form). The mask is given in octal. Common values for the mask are
002 giving all access to the group and read and execute access to others or
022 giving all access except write access for users in the group or others.

unalias pattern
All aliases whose names match the specified pattern are discarded. Thus all
aliases are removed by unalias *. It is not an error for nothing to be
unaliased.

unhash Use of the internal hash table to speed location of executed programs is
disabled.

unlimit
unlimit resource
unlimit -h
unlimit -h resource
Removes the limitation on resource. If no resource is specified, then all
resource limitations are removed. If -h is given, the corresponding hard
limits are removed. Only the superuser may do this.

unset pattern
All variables whose names match the specified pattern are removed. Thus all
variables are removed by unset *; this has noticeably distasteful side-
effects. It is not an error for nothing to be unset.

unsetenv pattern
Removes all variables whose names match the specified pattern from the
environment. See also the setenv command above and printenv(1).

wait Wait for all background jobs. If the shell is interactive, then an interrupt
can disrupt the wait. After the interrupt, the shell prints names and job
numbers of all jobs known to be outstanding.

which command
Displays the resolved command that will be executed by the shell.

while (expr)
...
end While the specified expression evaluates to non-zero, the commands between the
while and the matching end are evaluated. break and continue may be used to
terminate or continue the loop prematurely. (The while and end must appear
alone on their input lines.) Prompting occurs here the first time through the
loop as for the foreach statement if the input is a terminal.

%job Brings the specified job into the foreground.

%job & Continues the specified job in the background.

@
@ name= expr
@ name[index]= expr
The first form prints the values of all the shell variables. The second form
sets the specified name to the value of expr. If the expression contains ‘<’,
‘>’, ‘&’ or ‘|’ then at least this part of the expression must be placed
within ‘(’ ‘)’. The third form assigns the value of expr to the index'th
argument of name. Both name and its index'th component must already exist.

The operators ‘*=’, ‘+=’, etc. are available as in C. The space separating
the name from the assignment operator is optional. Spaces are, however,
mandatory in separating components of expr, which would otherwise be single
words.

Special postfix ‘++’ and ‘--’ operators increment and decrement name
respectively; i.e., “@ i++”.

Pre-defined and environment variables
The following variables have special meaning to the shell. Of these, argv, cwd, home, path,
prompt, shell and status are always set by the shell. Except for cwd and status, this
setting occurs only at initialization; these variables will not then be modified unless done
explicitly by the user.

The shell copies the environment variable USER into the variable user, TERM into term, and
HOME into home, and copies these back into the environment whenever the normal shell
variables are reset. The environment variable PATH is likewise handled; it is not necessary
to worry about its setting other than in the file .cshrc as inferior csh processes will
import the definition of path from the environment, and re-export it if you then change it.

argv Set to the arguments to the shell, it is from this variable that positional
parameters are substituted; i.e., “$1” is replaced by “$argv[1]”, etc.

cdpath Gives a list of alternate directories searched to find subdirectories in chdir
commands.

cwd The full pathname of the current directory.

echo Set when the -x command-line option is given. Causes each command and its
arguments to be echoed just before it is executed. For non-built-in commands all
expansions occur before echoing. Built-in commands are echoed before command and
filename substitution, since these substitutions are then done selectively.

filec Enable file name completion.

histchars Can be given a string value to change the characters used in history
substitution. The first character of its value is used as the history
substitution character, replacing the default character ‘!’. The second
character of its value replaces the character ‘^’ in quick substitutions.

histfile Can be set to the pathname where history is going to be saved/restored.

history Can be given a numeric value to control the size of the history list. Any
command that has been referenced in this many events will not be discarded. Too
large values of history may run the shell out of memory. The last executed
command is always saved on the history list.

home The home directory of the invoker, initialized from the environment. The
filename expansion of “~” refers to this variable.

ignoreeof If set the shell ignores end-of-file from input devices which are terminals.
This prevents shells from accidentally being killed by control-Ds.

mail The files where the shell checks for mail. This checking is done after each
command completion that will result in a prompt, if a specified interval has
elapsed. The shell says “You have new mail.” if the file exists with an access
time not greater than its modify time.

If the first word of the value of mail is numeric it specifies a different mail
checking interval, in seconds, than the default, which is 10 minutes.

If multiple mail files are specified, then the shell says “New mail in name” when
there is mail in the file name.

noclobber As described in the section on Input/output, restrictions are placed on output
redirection to ensure that files are not accidentally destroyed, and that ‘>>’
redirections refer to existing files.

noglob If set, filename expansion is inhibited. This inhibition is most useful in shell
scripts that are not dealing with filenames, or after a list of filenames has
been obtained and further expansions are not desirable.

nonomatch If set, it is not an error for a filename expansion to not match any existing
files; instead the primitive pattern is returned. It is still an error for the
primitive pattern to be malformed; i.e., “echo [” still gives an error.

notify If set, the shell notifies asynchronously of job completions; the default is to
present job completions just before printing a prompt.

path Each word of the path variable specifies a directory in which commands are to be
sought for execution. A null word specifies the current directory. If there is
no path variable then only full path names will execute. The usual search path
is “.”, “/bin”, “/usr/bin”, “/sbin” and “/usr/sbin”, but this may vary from
system to system. For the superuser the default search path is “/bin”,
/usr/bin”, “/sbin”, and “/usr/sbin”. A shell that is given neither the -c nor
the -t option will normally hash the contents of the directories in the path
variable after reading .cshrc, and each time the path variable is reset. If new
commands are added to these directories while the shell is active, it may be
necessary to do a rehash or the commands may not be found.

prompt The string that is printed before each command is read from an interactive
terminal input. If a ‘!’ appears in the string it will be replaced by the
current event number unless a preceding ‘\’ is given. Default is “%”, or “#” for
the superuser.

savehist Is given a numeric value to control the number of entries of the history list
that are saved in ~/.history when the user logs out. Any command that has been
referenced in this many events will be saved. During start up the shell sources
~/.history into the history list enabling history to be saved across logins. Too
large values of savehist will slow down the shell during start up. If savehist
is just set, the shell will use the value of history.

shell The file in which the shell resides. This variable is used in forking shells to
interpret files that have execute bits set, but which are not executable by the
system. (See the description of Non-built-in command execution below.)
Initialized to the (system-dependent) home of the shell.

status The status returned by the last command. If it terminated abnormally, then 0200
is added to the status. Built-in commands that fail return exit status 1, all
other built-in commands set status to 0.

time Controls automatic timing of commands. If set, then any command that takes more
than this many CPU seconds will cause a line giving user, system, and real times,
and a utilization percentage which is the ratio of user plus system times to real
time to be printed when it terminates.

verbose Set by the -v command-line option, causes the words of each command to be printed
after history substitution.

Non-built-in command execution
When a command to be executed is found to not be a built-in command the shell attempts to
execute the command via execve(2). Each word in the variable path names a directory from
which the shell will attempt to execute the command. If it is given neither a -c nor a -t
option, the shell will hash the names in these directories into an internal table so that it
will only try an exec in a directory if there is a possibility that the command resides
there. This shortcut greatly speeds command location when many directories are present in
the search path. If this mechanism has been turned off (via unhash), or if the shell was
given a -c or -t argument, and in any case for each directory component of path that does
not begin with a ‘/’, the shell concatenates with the given command name to form a path name
of a file which it then attempts to execute.

Parenthesized commands are always executed in a sub-shell. Thus

(cd; pwd); pwd

prints the home directory; leaving you where you were (printing this after the home
directory), while

cd; pwd

leaves you in the home directory. Parenthesized commands are most often used to prevent
chdir from affecting the current shell.

If the file has execute permissions but is not an executable binary to the system, then it
is assumed to be a file containing shell commands and a new shell is spawned to read it.

If there is an alias for shell then the words of the alias will be prepended to the argument
list to form the shell command. The first word of the alias should be the full path name of
the shell (e.g., “$shell”). Note that this is a special, late occurring, case of alias
substitution, and only allows words to be prepended to the argument list without change.

Signal handling
The shell normally ignores SIGQUIT signals. Jobs running detached (either by & or the bg or
%... & commands) are immune to signals generated from the keyboard, including hangups.
Other signals have the values which the shell inherited from its parent. The shell's
handling of interrupts and terminate signals in shell scripts can be controlled by onintr.
Login shells catch the SIGTERM (terminate) signal; otherwise this signal is passed on to
children from the state in the shell's parent. Interrupts are not allowed when a login
shell is reading the file .logout.

LIMITATIONS


Word lengths - Words can be no longer than 1024 characters. The number of arguments to a
command that involves filename expansion is limited to 1/6th the number of characters
allowed in an argument list. Command substitutions may substitute no more characters than
are allowed in an argument list. To detect looping, the shell restricts the number of alias
substitutions on a single line to 20.

Use bsd-csh online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

  • 1
    PyQt
    PyQt
    PyQt is the Python bindings for
    Digia's Qt cross-platform
    application development framework. It
    supports Python v2 and v3 and Qt v4 and
    Qt v5. PyQt is avail...
    Download PyQt
  • 2
    Sardi
    Sardi
    Sardi is a complete restyling and
    optimisation of svg code. 6 choices for
    your applications and 10 kind of folders
    to use in your file manager. The sardi
    icons...
    Download Sardi
  • 3
    LMMS Digital Audio Workstation
    LMMS Digital Audio Workstation
    LMMS is a free cross-platform software
    which allows you to produce music with
    your computer. If you like this project
    consider getting involved in the project
    h...
    Download LMMS Digital Audio Workstation
  • 4
    FreeRTOS Real Time Kernel (RTOS)
    FreeRTOS Real Time Kernel (RTOS)
    FreeRTOS is a market-leading real-time
    operating system (RTOS) for
    microcontrollers and small
    microprocessors. Distributed freely
    under the MIT open source lice...
    Download FreeRTOS Real Time Kernel (RTOS)
  • 5
    Avogadro
    Avogadro
    Avogadro is an advanced molecular
    editor designed for cross-platform use
    in computational chemistry, molecular
    modeling, bioinformatics, materials
    science and ...
    Download Avogadro
  • 6
    XMLTV
    XMLTV
    XMLTV is a set of programs to process
    TV (tvguide) listings and help manage
    your TV viewing, storing listings in an
    XML-based format. There are utilities to
    do...
    Download XMLTV
  • More »

Linux commands

Ad