This is the command CuraEngine that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
CuraEngine - STL to GCODE converter
SYNOPSIS
CuraEngine [-h] [-v] [-m 3x3matrix] [-s settingkey=value] -o <output.gcode> <model.stl>
DESCRIPTION
CuraEngine is a commandline tool for converting 3-D models to toolpaths used by 3-D
printers, in particular RepRap and derivatives. It is meant to be used by the cura(1) gui,
but can be used without it.
It does not support the use of a configuration file; all settings must be specified on the
commandline.
If not output file is specified, the standard output is used.
All settings are integer values, except for startCode and endCode, which are strings. Note
that they should usually contain newlines; make sure to use proper escaping to avoid the
shell from parsing them.
The units that are used are:
· Lengths are in micrometers.
· Speeds are in millimeters per second.
· Angles are in degrees.
· Times are in seconds.
The following integer settings can be specified:
coolHeadLift, downSkinCount, enableCombing, enableOozeShield, extruderOffset[1].X,
extruderOffset[1].Y, extruderOffset[2].X, extruderOffset[2].Y, extruderOffset[3].X,
extruderOffset[3].Y, extrusionWidth, fanFullOnLayerNr, fanSpeedMax, fanSpeedMin,
filamentDiameter, filamentFlow, fixHorrible, gcodeFlavor, infillOverlap, infillSpeed,
initialLayerSpeed, initialLayerThickness, initialSpeedupLayers, insetCount,
layerThickness, minimalExtrusionBeforeRetraction, minimalFeedrate, minimalLayerTime,
moveSpeed, multiVolumeOverlap, objectPosition.X, posx, objectPosition.Y, posy, objectSink,
printSpeed, raftBaseLinewidth, raftBaseThickness, raftInterfaceLinewidth,
raftInterfaceThickness, raftLineSpacing, raftMargin, retractionAmount,
retractionAmountExtruderSwitch, retractionMinimalDistance, retractionSpeed, skirtDistance,
skirtLineCount, skirtMinLength, sparseInfillLineDistance, spiralizeMode, supportAngle,
supportEverywhere, supportExtruder, supportLineDistance, supportXYDistance,
supportZDistance, upSkinCount, wipeTowerSize.
Use CuraEngine online using onworks.net services
