flow-send - Online in the Cloud

PROGRAM:

NAME

flow-send — Transmit flow data with the NetFlow protocol.

SYNOPSIS

flow-send [-h] [-d debug_level] [-m privacy_mask] [-s] [-x xmit_delay] [-V
pdu_version] localip/remoteip/port

DESCRIPTION

The flow-send utility is used to transmit flows in NetFlow format to a collector specified
by localip/remoteip/port.

OPTIONS

-d debug_level
Enable debugging.

-h Display help.

-s Enable spoofing of source IP address.

-m privacy_mask
Apply privacy_mask to the source and destination IP address of flows. For
example a privacy_mask of 255.255.255.0 would convert flows with
source/destination IP addresses 10.1.1.1 and 10.2.2.2 to 10.1.1.0 and 10.2.2.0
respectively.

-V pdu_version
Use pdu_version format when transmitting.

1 NetFlow version 1 (No sequence numbers, AS, or mask)
5 NetFlow version 5
6 NetFlow version 6 (5+ Encapsulation size)
7 NetFlow version 7 (Catalyst switches)
8.1 NetFlow AS Aggregation
8.2 NetFlow Proto Port Aggregation
8.3 NetFlow Source Prefix Aggregation
8.4 NetFlow Destination Prefix Aggregation
8.5 NetFlow Prefix Aggregation
8.6 NetFlow Destination (Catalyst switches)
8.7 NetFlow Source Destination (Catalyst switches)
8.8 NetFlow Full Flow (Catalyst switches)
8.9 NetFlow ToS AS Aggregation
8.10 NetFlow ToS Proto Port Aggregation
8.11 NetFlow ToS Source Prefix Aggregation
8.12 NetFlow ToS Destination Prefix Aggregation
8.13 NetFlow ToS Prefix Aggregation
8.14 NetFlow ToS Prefix Port Aggregation
1005 Flow-Tools tagged version 5

-x xmit_delay
Configure a microsecond transmit delay between packets. This may be necessary
in some configurations to prevent a transmit buffer overrun.

EXAMPLES

Transmit all flows in the directory /flows/krc4 to the collector at 10.0.0.1 listening on
port 9500.

flow-cat /flows/krc4 | flow-send 0/10.0.0.1/9500

Generate a test pattern of version 7 flows and send them to a collector at 10.0.0.1
listening on port 9500.

flow-gen -V7 | flow-send 0/10.0.0.1/9500

Use flow-send online using onworks.net services