foo2lava-wrapper - Online in the Cloud

PROGRAM:

NAME

foo2lava-wrapper - Convert Postscript into a LAVAFLOW or OPL printer stream

SYNOPSIS

foo2lava-wrapper [options] [ps-file]

DESCRIPTION

foo2lava-wrapper is a Foomatic compatible printer wrapper for the foo2lava printer driver.
This script reads a Postscript ps-file or standard input and converts it to Zenographics
LAVAFLOW printer format for driving the Konica Minolta magicolor 1600W color laser
printer, the Konica Minolta magicolor 1680MF/1690MF AIO printer, the Konica Minolta
magicolor 2480/2490 MF AIO printer, the Konica Minolta magicolor 2530 DL network color
laser printer, and other Zenographics-based LAVAFLOW printers.

This script can be used in a standalone fashion, but is intended to be called from a
printer spooler system which uses the Foomatic printer database.

COMMAND LINE OPTIONS

Normal Options
These are the options used to select the parameters of a print job that are usually
controlled on a per job basis.

-c Print in color (else monochrome).

-C colormode
Color correction mode [0].

1 Photos (using m2300w CRDs)
2 Photos and text (using m2300w CRDs)
3 Graphics and text (using m2300w CRDs)
10 ICM color profile (using -G *.icm file)

-d duplex
Duplex code to send to printer [1].
│ │ │
│1 off │ 2 long edge │ 3 short edge

-m media
Media code to send to printer [0].

──────────────────────────
Media 2530DL
──────────────────────────
plain 0
transparency 4
thick stock 20
envelope 22
letterhead 23
postcard 25
labels 26
recycled 27

-p paper
Paper size code to send to printer [2].

┌──────────────────┬─────────────────────┐
│ 1 executive │ 25 A5 │
│ 2 letter │ 26 A4 │
│ 3 legal │ 45 B5jis │
│ 80 env Monarch │ 65 B5iso │
│ 81 env #10 │ 90 env DL │
│ 91 env C5 │ 92 env B5 │
│835 4x6" photo │ 837 10x15cm photo │
└──────────────────┴─────────────────────┘
-n copies
Number of copies [1].

-r xresxyres
Set device resolution in pixels/inch [1200x600].

-s source
Source (Input Slot) code to send to printer [255].
│ │
│1 Tray 1 │ 255 auto
│4 Tray 2 │

-t Draft mode. Every other pixel is white.

-2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
Print in N-up. Requires the psutils package.

-o orient
Orientation used for N-up.

Portrait -op (normal)
Landscape -ol (rotated 90 degrees anticlockwise)
Seascape -os (rotated 90 degrees clockwise)

Printer Tweaking Options
These are the options used to customize the operation of foo2lava for a particular
printer.

-u xoffxyoff
Set the offset of the start of the printable region from the upper left corner, in
pixels [varies with paper size]. The defaults should work on the 2200DL and
2300DL, and have not been tested on any other printers.

-l xoffxyoff
Set the offset of the end of the printable region from the lower right corner, in
pixels [varies with paper size]. The defaults should work on the 2200DL and
2300DL, and have not been tested on any other printers.

-L mask
Send the logical clipping values from -u/-l in the LAVAFLOW stream. foo2lava-
wrapper always runs Ghostscript with the ideal page dimensions, so that the scale
of the image is correct, regardless whether or not the printer has unprintable
regions. This option is used to move the position of the clipped image back to
where it belongs on the page. The default is to send the amount which was clipped
by -u and -l, and should be good in most cases.

0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts

-z model
Model. The default is [0].

model protocol Description
0 LAVAFLOW magicolor 2490 MF
0 LAVAFLOW magicolor 2530 DL
1 OPL magicolor 2480 MF
2 LAVAFLOW magicolor 1600W
2 LAVAFLOW magicolor 1680MF
2 LAVAFLOW magicolor 1690MF

Color Tweaking Options
These are the options used to control the quality of color output. Color correction is
currently a WORK IN PROGRESS.

-g gsopts
Additional options to pass to Ghostscript, such as -g“-dDITHERPPI=nnn”, etc. This
option may appear more than once.

-G profile.icm
Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-
icc2ps and adjust the printer colors by using the Postscript setcolorrendering
operator. (WORK IN PROGRESS).

-G gamma-file.ps
Prepend gamma-file.ps to the Postscript input to perform color correction using the
setcolortransfer Postscript operator. For example, the file might contain:
{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

-I intent
Select profile intent from the ICM file. 0=Perceptual, 1=Colorimetric,
2=Saturation, 3=Absolute. Default is 0 (perceptual).

Debugging Options
These options are used for debugging foo2lava and its wrapper.

-S plane
Output just a single color plane from a color print and print it on the black
plane. The default is to output all color planes.

1 Cyan
2 Magenta
3 Yellow
4 Black

-D level
Set Debug level [0].

EXAMPLES

Create a monochrome LAVAFLOW stream from a Postscript document, examine it, and then print
it using a RAW print queue:

foo2lava-wrapper testpage.ps > testpage.zm
lavadecode < testpage.zm
lpr -P raw testpage.zm

Create a color LAVAFLOW stream from a Postscript document:

foo2lava-wrapper -c testpage.ps > testpage.zc

Use foo2lava-wrapper online using onworks.net services