This is the command hcitool that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
hcitool - configure Bluetooth connections
SYNOPSIS
hcitool [-h]
hcitool [-i <hciX>] [command [command parameters]]
DESCRIPTION
hcitool is used to configure Bluetooth connections and send some special command to
Bluetooth devices. If no command is given, or if the option -h is used, hcitool prints
some usage information and exits.
OPTIONS
-h Gives a list of possible commands
-i <hciX>
The command is applied to device hciX , which must be the name of an installed
Bluetooth device. If not specified, the command will be sent to the first available
Bluetooth device.
COMMANDS
dev Display local devices
inq Inquire remote devices. For each discovered device, Bluetooth device address, clock
offset and class are printed.
scan Inquire remote devices. For each discovered device, device name are printed.
name <bdaddr>
Print device name of remote device with Bluetooth address bdaddr.
info <bdaddr>
Print device name, version and supported features of remote device with Bluetooth
address bdaddr.
spinq Start periodic inquiry process. No inquiry results are printed.
epinq Exit periodic inquiry process.
cmd <ogf> <ocf> [parameters]
Submit an arbitrary HCI command to local device. ogf, ocf and parameters are
hexadecimal bytes.
con Display active baseband connections
cc [--role=m|s] [--pkt-type=<ptype>] <bdaddr>
Create baseband connection to remote device with Bluetooth address bdaddr. Option
--pkt-type specifies a list of allowed packet types. <ptype> is a comma-separated
list of packet types, where the possible packet types are DM1, DM3, DM5, DH1, DH3,
DH5, HV1, HV2, HV3. Default is to allow all packet types. Option --role can have
value m (do not allow role switch, stay master) or s (allow role switch, become
slave if the peer asks to become master). Default is m.
dc <bdaddr> [reason]
Delete baseband connection from remote device with Bluetooth address bdaddr. The
reason can be one of the Bluetooth HCI error codes. Default is 19 for user ended
connections. The value must be given in decimal.
sr <bdaddr> <role>
Switch role for the baseband connection from the remote device to master or slave.
cpt <bdaddr> <packet types>
Change packet types for baseband connection to device with Bluetooth address
bdaddr. packet types is a comma-separated list of packet types, where the possible
packet types are DM1, DM3, DM5, DH1, DH3, DH5, HV1, HV2, HV3.
rssi <bdaddr>
Display received signal strength information for the connection to the device with
Bluetooth address bdaddr.
lq <bdaddr>
Display link quality for the connection to the device with Bluetooth address
bdaddr.
tpl <bdaddr> [type]
Display transmit power level for the connection to the device with Bluetooth
address bdaddr. The type can be 0 for the current transmit power level (which is
default) or 1 for the maximum transmit power level.
afh <bdaddr>
Display AFH channel map for the connection to the device with Bluetooth address
bdaddr.
lp <bdaddr> [value]
With no value, displays link policy settings for the connection to the device with
Bluetooth address bdaddr. If value is given, sets the link policy settings for
that connection to value. Possible values are RSWITCH, HOLD, SNIFF and PARK.
lst <bdaddr> [value]
With no value, displays link supervision timeout for the connection to the device
with Bluetooth address bdaddr. If value is given, sets the link supervision
timeout for that connection to value slots, or to infinite if value is 0.
auth <bdaddr>
Request authentication for the device with Bluetooth address bdaddr.
enc <bdaddr> [encrypt enable]
Enable or disable the encryption for the device with Bluetooth address bdaddr.
key <bdaddr>
Change the connection link key for the device with Bluetooth address bdaddr.
clkoff <bdaddr>
Read the clock offset for the device with Bluetooth address bdaddr.
clock [bdaddr] [which clock]
Read the clock for the device with Bluetooth address bdaddr. The clock can be 0
for the local clock or 1 for the piconet clock (which is default).
lescan [--privacy] [--passive] [--whitelist] [--discovery=g|l] [--duplicates]
Start LE scan
leinfo [--static] [--random] <bdaddr>
Get LE remote information
lewladd [--random] <bdaddr>
Add device to LE White List
lewlrm <bdaddr>
Remove device from LE White List
lewlsz Read size of LE White List
lewlclr
Clear LE White List
lerladd [--local irk] [--peer irk] [--random] <bdaddr>
Add device to LE Resolving List
lerlrm <bdaddr>
Remove device from LE Resolving List
lerlclr
Clear LE Resolving List
lerlsz Read size of LE Resolving List
lerlon Enable LE Address Resolution
lerloff
Disable LE Address Resolution
lecc [--static] [--random] <bdaddr> | [--whitelist]
Create a LE Connection
ledc <handle> [reason]
Disconnect a LE Connection
lecup <handle> <min> <max> <latency> <timeout>
LE Connection Update
AUTHORS
Written by Maxim Krasnyansky <maxk@qualcomm.com> and Marcel Holtmann <marcel@holtmann.org>
man page by Fabrizio Gennari <fabrizio.gennari@philips.com>
Use hcitool online using onworks.net services