This is the command ir-keytable that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
ir-keytable - a swiss-knife tool to handle Remote Controllers.
SYNOPSIS
ir-keytable [OPTION]... --device [/dev/input/event* device]
ir-keytable [OPTION]... --sysdev [ir class (f. ex. rc0)]
ir-keytable [OPTION]... [for using the rc0 sysdev]
DESCRIPTION
ir-keytable is a tool that lists the Remote Controller devices, allows one to get/set IR
keycode/scancode tables, test events generated by IR, and to adjust other Remote
Controller options.
Note: You need to have read permissions on /dev/input for most of the options to work.
OPTIONS
-a, --auto-load=CFGFILE
Auto-load a table, based on a configuration file. Only works with sysdev.
-c, --clear
clears the old table
-d, --device=DEV
ir device to control
-D, --delay=DELAY
Sets the delay before repeating a keystroke
-k, --set-key=SCANKEY
Change scan/key pairs
-p, --protocol=PROTOCOL
Protocol to enable (the other ones will be disabled). To enable more than one, use
the option more than one time
-P, --period=PERIOD
Sets the period to repeat a keystroke
-r, --read
reads the current scancode/keycode table
-s, --sysdev=SYSDEV
ir class device to control
-t, --test
test if IR is generating events
-v, --verbose
enables debug messages
-w, --write=TABLE
write (adds) the scancodes to the device scancode/keycode table from the specified
TABLE file
-?, --help
Prints the help message
--usage
Give a short usage message
-V, --version
print the v4l2-utils version
Mandatory or optional arguments to long options are also mandatory or optional for any
corresponding short options. Options can be combined together.
The options arguments are:
DEV the /dev/input/event* device to control
SYSDEV the ir class as found at /sys/class/rc
TABLE a file wit a set of scancode=keycode value pairs
SCANKEY
a set of scancode1=keycode1,scancode2=keycode2.. value pairs
PROTOCOL
protocol name to be enabled (case insensitive). Supported protocols are: NEC, RC-5,
RC-6, JVC, SONY, SANYO, LIRC, RC-5-SZ, SHARP, MCE-KBD, XMP, other, all.
DELAY Delay before repeating a keystroke
PERIOD Period to repeat a keystroke
CFGFILE
configuration file that associates a driver/table name with a keymap file
EXIT STATUS
On success, it returns 0. Otherwise, it will return the error code.
EXAMPLES
To list all connected Remote Controller devices:
ir-keytable
To clean the keycode table and use a newer one:
ir-keytable -c -w /etc/rc_keymaps/nec_terratec_cinergy_xs
To append more codes to the existing table:
ir-keytable -w /etc/rc_keymaps/nec_terratec_cinergy_xs
To read the current keytable, on the second remote controller: ir-keytable -s rc1 -r
Use ir-keytable online using onworks.net services