lbunzip2 - Online in the Cloud

PROGRAM:

NAME

lbzip2 - parallel bzip2 utility

SYNOPSIS

lbzip2|bzip2 [-n WTHRS] [-k|-c|-t] [-d] [-1 .. -9] [-f] [-s] [-u] [-v] [-S] [ FILE ... ]

lbunzip2|bunzip2 [-n WTHRS] [-k|-c|-t] [-z] [-f] [-s] [-u] [-v] [-S] [ FILE ... ]

lbzcat|bzcat [-n WTHRS] [-z] [-f] [-s] [-u] [-v] [-S] [ FILE ... ]

lbzip2|bzip2|lbunzip2|bunzip2|lbzcat|bzcat -h

DESCRIPTION

Compress or decompress FILE operands or standard input to regular files or standard output
using the Burrows-Wheeler block-sorting text compression algorithm. The lbzip2 utility
employs multiple threads and an input-bound splitter even when decompressing .bz2 files
created by standard bzip2.

Compression is generally considerably better than that achieved by more conventional
LZ77/LZ78-based compressors, and competitive with all but the best of the PPM family of
statistical compressors.

Compression is always performed, even if the compressed file is slightly larger than the
original. The worst case expansion is for files of zero length, which expand to fourteen
bytes. Random data (including the output of most file compressors) is coded with
asymptotic expansion of around 0.5%.

The command-line options are deliberately very similar to those of bzip2 and gzip, but
they are not identical.

INVOCATION

The default mode of operation is compression. If the utility is invoked as lbunzip2 or
bunzip2, the mode is switched to decompression. Calling the utility as lbzcat or bzcat
selects decompression, with the decompressed byte-stream written to standard output.

OPTIONS

-n WTHRS
Set the number of (de)compressor threads to WTHRS. If this option is not
specified, lbzip2 tries to query the system for the number of online processors (if
both the compilation environment and the execution environment support that), or
exits with an error (if it's unable to determine the number of processors online).

-k, --keep
Don't remove FILE operands after successful (de)compression. Open regular input
files with more than one link.

-c, --stdout
Write output to standard output, even when FILE operands are present. Implies -k
and excludes -t.

-t, --test
Test decompression; discard output instead of writing it to files or standard
output. Implies -k and excludes -c. Roughly equivalent to passing -c and
redirecting standard output to the bit bucket.

-d, --decompress
Force decompression over the mode of operation selected by the invocation name.

-z, --compress
Force compression over the mode of operation selected by the invocation name.

-1 .. -9
Set the compression block size to 100K .. 900K, in 100K increments. Ignored during
decompression. See also the BLOCK SIZE section below.

--fast Alias for -1.

--best Alias for -9. This is the default.

-f, --force
Open non-regular input files. Open input files with more than one link, breaking
links when -k isn't specified in addition. Try to remove each output file before
opening it. By default lbzip2 will not overwrite existing files; if you want this
to happen, you should specify -f. If -c and -d are also given don't reject files
not in bzip2 format, just copy them without change; without -f lbzip2 would stop
after reaching a file that is not in bzip2 format.

-s, --small
Reduce memory usage at cost of performance.

-u, --sequential
Perform splitting input blocks sequentially. This may improve compression ratio and
decrease CPU usage, but will degrade scalability.

-v, --verbose
Be more verbose. Print more detailed information about (de)compression progress to
standard error: before processing each file, print a message stating the names of
input and output files; during (de)compression, print a rough percentage of
completeness and estimated time of arrival (only if standard error is connected to
a terminal); after processing each file print a message showing compression ratio,
space savings, total compression time (wall time) and average (de)compression speed
(bytes of plain data processed per second).

-S Print condition variable statistics to standard error for each completed
(de)compression operation. Useful in profiling.

-q, --quiet, --repetitive-fast, --repetitive-best, --exponential
Accepted for compatibility with bzip2, otherwise ignored.

-h, --help
Print help on command-line usage on standard output and exit successfully.

-L, --license, -V, --version
Print license and version information on standard output and exit successfully.

ENVIRONMENT

LBZIP2, BZIP2, BZIP
Before parsing the command line, lbzip2 inserts the contents of these variables, in
the order specified, between the invocation name and the rest of the command line.
Tokens are separated by spaces and tabs, which cannot be escaped.

OPERANDS

FILE Specify files to compress or decompress.

FILEs with .bz2, .tbz, .tbz2 and .tz2 name suffixes will be skipped when
compressing. When decompressing, .bz2 suffixes will be removed in output filenames;
.tbz, .tbz2 and .tz2 suffixes will be replaced by .tar; other filenames will be
suffixed with .out. If an INT or TERM signal is delivered to lbzip2, then it
removes the regular output file currently open before exiting.

If no FILE is given, lbzip2 works as a filter, processing standard input to
standard output. In this case, lbzip2 will decline to write compressed output to a
terminal (or read compressed input from a terminal), as this would be entirely
incomprehensible and therefore pointless.

EXIT STATUS

0 if lbzip2 finishes successfully. This presumes that whenever it tries, lbzip2 never
fails to write to standard error.

1 if lbzip2 encounters a fatal error.

4 if lbzip2 issues warnings without encountering a fatal error. This presumes that
whenever it tries, lbzip2 never fails to write to standard error.

SIGPIPE, SIGXFSZ
if lbzip2 intends to exit with status 1 due to any fatal error, but any such signal
with inherited SIG_DFL action was generated for lbzip2 previously, then lbzip2
terminates by way of one of said signals, after cleaning up any interrupted output
file.

SIGABRT
if a runtime assertion fails (i.e. lbzip2 detects a bug in itself). Hopefully
whoever compiled your binary wasn't bold enough to #define NDEBUG.

SIGINT, SIGTERM
lbzip2 catches these signals so that it can remove an interrupted output file. In
such cases, lbzip2 exits by re-raising (one of) the received signal(s).

BLOCK SIZE

lbzip2 compresses large files in blocks. It can operate at various block sizes, ranging
from 100k to 900k in 100k steps, and it allocates only as much memory as it needs to. The
block size affects both the compression ratio achieved, and the amount of memory needed
both for compression and decompression. Compression and decompression speed is virtually
unaffected by block size, provided that the file being processed is large enough to be
split among all worker threads.

The flags -1 through -9 specify the block size to be 100,000 bytes through 900,000 bytes
(the default) respectively. At decompression-time, the block size used for compression is
read from the compressed file -- the flags -1 to -9 are irrelevant to and so ignored
during decompression.

Larger block sizes give rapidly diminishing marginal returns; most of the compression
comes from the first two or three hundred k of block size, a fact worth bearing in mind
when using lbzip2 on small machines. It is also important to appreciate that the
decompression memory requirement is set at compression-time by the choice of block size.
In general you should try and use the largest block size memory constraints allow.

Another significant point applies to small files. By design, only one of lbzip2's worker
threads can work on a single block. This means that if the number of blocks in the
compressed file is less than the number of processors online, then some of worker threads
will remain idle for the entire time. Compressing small files with smaller block sizes can
therefore significantly increase both compression and decompression speed. The speed
difference is more noticeable as the number of CPU cores grows.

ERROR HANDLING

Dealing with error conditions is the least satisfactory aspect of lbzip2. The policy is
to try and leave the filesystem in a consistent state, then quit, even if it means not
processing some of the files mentioned in the command line.

`A consistent state' means that a file exists either in its compressed or uncompressed
form, but not both. This boils down to the rule `delete the output file if an error
condition occurs, leaving the input intact'. Input files are only deleted when we can be
pretty sure the output file has been written and closed successfully.

RESOURCE ALLOCATION

lbzip2 needs various kinds of system resources to operate. Those include memory, threads,
mutexes and condition variables. The policy is to simply give up if a resource allocation
failure occurs.

Resource consumption grows linearly with number of worker threads. If lbzip2 fails because
of lack of some resources, decreasing number of worker threads may help. It would be
possible for lbzip2 to try to reduce number of worker threads (and hence the resource
consumption), or to move on to subsequent files in the hope that some might need less
resources, but the complications for doing this seem more trouble than they are worth.

DAMAGED FILES

lbzip2 attempts to compress data by performing several non-trivial transformations on it.
Every compression of a file implies an assumption that the compressed file can be
decompressed to reproduce the original. Great efforts in design, coding and testing have
been made to ensure that this program works correctly. However, the complexity of the
algorithms, and, in particular, the presence of various special cases in the code which
occur with very low but non-zero probability make it very difficult to rule out the
possibility of bugs remaining in the program. That is not to say this program is
inherently unreliable. Indeed, I very much hope the opposite is true -- lbzip2 has been
carefully constructed and extensively tested.

As a self-check for your protection, lbzip2 uses 32-bit CRCs to make sure that the
decompressed version of a file is identical to the original. This guards against
corruption of the compressed data, and against undiscovered bugs in lbzip2 (hopefully
unlikely). The chances of data corruption going undetected is microscopic, about one
chance in four billion for each file processed. Be aware, though, that the check occurs
upon decompression, so it can only tell you that that something is wrong.

CRCs can only detect corrupted files, they can't help you recover the original,
uncompressed data. However, because of the block nature of the compression algorithm, it
may be possible to recover some parts of the damaged file, even if some blocks are
destroyed.

Use lbunzip2 online using onworks.net services