mia-3dforce - Online in the Cloud

PROGRAM:

NAME

mia-3dforce - Evaluate the registration force between two 3D images.

SYNOPSIS

mia-3dforce -i <src-file> -r <ref-file> -o <out-file> [options]

DESCRIPTION

mia-3dforce This program is used to create an image comprising the pixel-wise norm of the
ggradient of a given cost function.

OPTIONS

-i --src-file=(input, required); io
input image For supported file types see PLUGINS:3dimage/io

-r --ref-file=(input, required); io
output force norm image For supported file types see PLUGINS:3dimage/io

-o --out-file=(output, required); io
reference image For supported file types see PLUGINS:3dimage/io

-c --cost=ssd
cost function to usecost function to use For supported plugins see
PLUGINS:3dimage/cost

Help & Info
-V --verbose=warning
verbosity of output, print messages of given level and higher priorities.
Supported priorities starting at lowest level are:
info ‐ Low level messages
trace ‐ Function call trace
fail ‐ Report test failures
warning ‐ Warnings
error ‐ Report errors
debug ‐ Debug output
message ‐ Normal messages
fatal ‐ Report only fatal errors

--copyright
print copyright information

-h --help
print this help

-? --usage
print a short help

--version
print the version number and exit

Processing
--threads=-1
Maxiumum number of threads to use for processing,This number should be lower
or equal to the number of logical processor cores in the machine. (-1:
automatic estimation).Maxiumum number of threads to use for processing,This
number should be lower or equal to the number of logical processor cores in
the machine. (-1: automatic estimation).

PLUGINS: 1d/splinekernel

bspline B-spline kernel creation , supported parameters are:

d = 3; int in [0, 5]
Spline degree.

omoms OMoms-spline kernel creation, supported parameters are:

d = 3; int in [3, 3]
Spline degree.

PLUGINS: 3dimage/cost

lncc local normalized cross correlation with masking support., supported parameters
are:

w = 5; uint in [1, 256]
half width of the window used for evaluating the localized cross
correlation.

mi Spline parzen based mutual information., supported parameters are:

cut = 0; float in [0, 40]
Percentage of pixels to cut at high and low intensities to remove
outliers.

mbins = 64; uint in [1, 256]
Number of histogram bins used for the moving image.

mkernel = [bspline:d=3]; factory
Spline kernel for moving image parzen hinstogram. For supported plug-ins
see PLUGINS:1d/splinekernel

rbins = 64; uint in [1, 256]
Number of histogram bins used for the reference image.

rkernel = [bspline:d=0]; factory
Spline kernel for reference image parzen hinstogram. For supported plug-
ins see PLUGINS:1d/splinekernel

ncc normalized cross correlation.

(no parameters)

ngf This function evaluates the image similarity based on normalized gradient
fields. Given normalized gradient fields $ _S$ of the src image and $ _R$ of the
ref image various evaluators are implemented., supported parameters are:

eval = ds; dict
plugin subtype (sq, ds,dot,cross). Supported values are:
ds ‐ square of scaled difference
dot ‐ scalar product kernel
cross ‐ cross product kernel

ssd 3D image cost: sum of squared differences, supported parameters are:

autothresh = 0; float in [0, 1000]
Use automatic masking of the moving image by only takeing intensity values
into accound that are larger than the given threshold.

norm = 0; bool
Set whether the metric should be normalized by the number of image pixels.

ssd-automask
3D image cost: sum of squared differences, with automasking based on given
thresholds, supported parameters are:

rthresh = 0; double
Threshold intensity value for reference image.

sthresh = 0; double
Threshold intensity value for source image.

PLUGINS: 3dimage/io

analyze Analyze 7.5 image

Recognized file extensions: .HDR, .hdr

Supported element types:
unsigned 8 bit, signed 16 bit, signed 32 bit, floating point 32 bit,
floating point 64 bit

datapool Virtual IO to and from the internal data pool

Recognized file extensions: .@

dicom Dicom image series as 3D

Recognized file extensions: .DCM, .dcm

Supported element types:
signed 16 bit, unsigned 16 bit

hdf5 HDF5 3D image IO

Recognized file extensions: .H5, .h5

Supported element types:
binary data, signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit,
signed 32 bit, unsigned 32 bit, signed 64 bit, unsigned 64 bit, floating
point 32 bit, floating point 64 bit

inria INRIA image

Recognized file extensions: .INR, .inr

Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32
bit, unsigned 32 bit, floating point 32 bit, floating point 64 bit

mhd MetaIO 3D image IO using the VTK implementation (experimental).

Recognized file extensions: .MHA, .MHD, .mha, .mhd

Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32
bit, unsigned 32 bit, floating point 32 bit, floating point 64 bit

nifti NIFTI-1 3D image IO

Recognized file extensions: .NII, .nii

Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32
bit, unsigned 32 bit, signed 64 bit, unsigned 64 bit, floating point 32
bit, floating point 64 bit

vff VFF Sun raster format

Recognized file extensions: .VFF, .vff

Supported element types:
unsigned 8 bit, signed 16 bit

vista Vista 3D

Recognized file extensions: .V, .VISTA, .v, .vista

Supported element types:
binary data, signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit,
signed 32 bit, unsigned 32 bit, floating point 32 bit, floating point 64
bit

vti 3D image VTK-XML in- and output (experimental).

Recognized file extensions: .VTI, .vti

Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32
bit, unsigned 32 bit, floating point 32 bit, floating point 64 bit

vtk 3D VTK image legacy in- and output (experimental).

Recognized file extensions: .VTK, .VTKIMAGE, .vtk, .vtkimage

Supported element types:
binary data, signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit,
signed 32 bit, unsigned 32 bit, floating point 32 bit, floating point 64
bit

EXAMPLE

Evaluate the weigtes sum of SSD between src.v and ref.v and store the result in
forcenorm.v.

mia-3dforce -i src.v -r ref.v -c ssd -o forcenorm.v

AUTHOR(s)

Gert Wollny

COPYRIGHT

This software is Copyright (c) 1999‐2015 Leipzig, Germany and Madrid, Spain. It comes
with ABSOLUTELY NO WARRANTY and you may redistribute it under the terms of the GNU
GENERAL PUBLIC LICENSE Version 3 (or later). For more information run the program with the
option '--copyright'.

Use mia-3dforce online using onworks.net services