This is the command networkctl that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
networkctl - Query the status of network links
SYNOPSIS
networkctl [OPTIONS...] COMMAND [LINK...]
DESCRIPTION
networkctl may be used to introspect the state of the network links as seen by
systemd-networkd. Please refer to systemd-networkd.service(8) for an introduction to the
basic concepts, functionality, and configuration syntax.
OPTIONS
The following options are understood:
-a --all
Show all links with status.
-h, --help
Print a short help text and exit.
--version
Print a short version string and exit.
--no-legend
Do not print the legend, i.e. column headers and the footer with hints.
--no-pager
Do not pipe output into a pager.
COMMANDS
The following commands are understood:
list
Show a list of existing links and their status. Produces output similar to
IDX LINK TYPE OPERATIONAL SETUP
1 lo loopback carrier unmanaged
2 eth0 ether routable configured
3 virbr0 ether no-carrier unmanaged
4 virbr0-nic ether off unmanaged
4 links listed.
status [LINK...]
Show information about the specified links: type, state, kernel module driver,
hardware and IP address, configured DNS servers, etc.
When no links are specified, routable links are shown. Also see the option --all.
Produces output similar to
● State: routable
Address: 10.193.76.5 on eth0
192.168.122.1 on virbr0
169.254.190.105 on eth0
fe80::5054:aa:bbbb:cccc on eth0
Gateway: 10.193.11.1 (CISCO SYSTEMS, INC.) on eth0
DNS: 8.8.8.8
8.8.4.4
lldp
Show LLDP (Link Layer Discovery Protocol) status.
EXIT STATUS
On success, 0 is returned, a non-zero failure code otherwise.
Use networkctl online using onworks.net services
