This is the command owread that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
owdir, owread, owwrite, owget, owexist, owpresent - lightweight owserver access
SYNOPSIS
Minimal options
owdir -s [host:]port [directory]
owread -s [host:]port filepath
owwrite -s [host:]port filepath value
owget -s [host:]port [directory] | filepath
Server discovery
owdir --autoserver [directory]
owread --autoserver filepath
owwrite --autoserver filepath value
owget --autoserver [directory] | filepath
Full options
owdir -q --quiet -f --format f[.]i[[.]c] ] [ --dir ] -s [host:]port [directory]
[directory2 ...]
owread -q --quiet -C --celsius -K --kelvin -F --fahrenheit -R --rankine [ --hex ] [
--start= offset ] [ --size= bytes ] -s [host:]port filepath [filepath2 ...]
owwrite -q --quiet -C --celsius -K --kelvin -F --fahrenheit -R --rankine [ --hex ] [
--start= offset ] -s [host:]port filepath value [filepath2 value2 ...]
owget -q --quiet -f --format f[.]i[[.]c] -C --celsius -K --kelvin -F --fahrenheit -R
--rankine [ --hex ] [ --start= offset ] [ --size= bytes ] [ --dir ] -s [host:]port
[directory] | filepath
Version
owdir -V --version
owread -V --version
owwrite -V --version
owget -V --version
Help
owdir -h | --help
owread -h | --help
owwrite -h | --help
owget -h | --help
DESCRIPTION
1-Wire
1-wire is a wiring protocol and series of devices designed and manufactured by Dallas
Semiconductor, Inc. The bus is a low-power low-speed low-connector scheme where the data
line can also provide power.
Each device is uniquely and unalterably numbered during manufacture. There are a wide
variety of devices, including memory, sensors (humidity, temperature, voltage, contact,
current), switches, timers and data loggers. More complex devices (like thermocouple
sensors) can be built with these basic devices. There are also 1-wire devices that have
encryption included.
The 1-wire scheme uses a single bus master and multiple slaves on the same wire. The bus
master initiates all communication. The slaves can be individually discovered and
addressed using their unique ID.
Bus masters come in a variety of configurations including serial, parallel, i2c, network
or USB adapters.
OWFS design
OWFS is a suite of programs that designed to make the 1-wire bus and its devices easily
accessible. The underlying principle is to create a virtual filesystem, with the unique ID
being the directory, and the individual properties of the device are represented as simple
files that can be read and written.
Details of the individual slave or master design are hidden behind a consistent interface.
The goal is to provide an easy set of tools for a software designer to create monitoring
or control applications. There are some performance enhancements in the implementation,
including data caching, parallel access to bus masters, and aggregation of device
communication. Still the fundemental goal has been ease of use, flexibility and
correctness rather than speed.
OWSHELL programs
owdir owread owwrite and owget are collectively called the owshell programs. They allow
lightweight access to an owserver (1) for use in command line scripts.
Unlike owserver (1) owhttpd (1) owftpd (1) owhttpd (1) there is not persistent connection
with the 1-wire bus, no caching and no multithreading. Instead, each program connects to a
running owserver (1) and performs a quick set of queries.
owserver (1) performs the actual 1-wire connection (to physical 1-wire busses or other
owserver programs), performs concurrency locking, caching, and error collection.
owshell programs are intended for use in command line scripts. An alternative approach is
to mount an owfs (1) filesystem and perform direct file lists, reads and writes.
owdir
owdir performs a directory listing. With no argument, all the devices on the main 1-wire
bus will be listed. Given the name of a 1-wire device, the available properties will be
listed. It is the equivalent of
ls directory
in the owfs (1) filesystem.
owread
owread obtains for value of a 1-wire device property. e.g. 28.0080BE21AA00/temperature
gives the DS18B20 temperature. It is the equivalent of
cat filepath
in the owfs (1) filesystem.
owwrite
owwrite performs a change of a property, changing a 1-wire device setting or writing to
memory. It is the equivalent of
echo value > filepath
in the owfs (1) filesystem.
owget
owget (1) is a convenience program, combining the function of owdir (1) and owread (1) by
first trying to read the argument as a directory, and if that fails as a 1-wire property.
STANDARD OPTIONS
--autoserver
Find an owserver using the Service Discovery protocol. Essentially Apple's Bonjour (aka
zeroconf). Only the first owserver will be used, and that choice is probably arbitrary.
-s [host:]port
Connect via tcp (network) to an owserver process that is connected to a physical 1-wire
bus. This allows multiple processes to share the same bus. The owserver process can be
local or remote.
If the server option is not specified, the default is the local machine and the IANA
allocated default port of 4304. Thus "-s localhost:4304" is the equivalent.
DATA OPTIONS
--hex
Hexidecimal mode. For reading data, each byte of character will be displayed as two
characrters 0-9ABCDEF. Most useful for reading memory locations. No spaces between data.
Writing data in hexidecimal mode just means that the data should be given as one long
hexidecimal string.
--start=offset
Read or write memory locations starting at the offset byte rather than the beginning. An
offset of 0 means the beginning (and is the default).
--size=bytes
Read up to the specified number of bytes of a memory location.
HELP OPTIONS
-h --help
Shows (this) basic summary of options.
-V --version
Version of this program.
DISPLAY OPTIONS
--dir
Modify the display of directories to indicate which entries are also directories. A
directory member will have a trailing '/' if it is a directory itself. This aids recursive
searches.
-f --format f[.]i[[.]c]
Display format for the 1-wire devices. Each device has a 8 byte address, consisting of:
f family code, 1 byte
i ID number, 6 bytes
c CRC checksum, 1 byte
Possible formats are f.i (default, 01.A1B2C3D4E5F6), fi fic f.ic f.i.c and fi.c
All formats are accepted as input, but the output will be in the specified format.
EXAMPLE
owdir -s 3000 --format fic
Get the device listing (full 16 hex digits, no dots) from the local owserver at
port 3000
owread -F --autoserver 51.125499A32000/typeK/temperature
Read temperature from the DS2751-based thermocouple on an auto-discovered owserver
Temperature in fahrenheit.
owwrite -s 10.0.1.2:3001 32.000800AD23110/pages/page.1 "Passed"
Connect to a OWFS server process ( owserver ) that was started on another machine
at tcp port 3001 and write to the memory of a DS2780
Use owread online using onworks.net services