This is the command ppmtomitsu that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
ppmtomitsu - convert a portable pixmap to a Mitsubishi S340-10 file
SYNOPSIS
ppmtomitsu [-sharpness val] [-enlarge val] [-media string] [-copy val] [-dpi300] [-tiny]
[ppmfile]
DESCRIPTION
Reads a portable pixmap as input and converts it into a format suitable to be printed by a
Mitsubishi S340-10 printer, or any other Mitsubishi color sublimation printer.
The Mitsubishi S340-10 Color Sublimation printer supports 24bit color. Images of the
available sizes take so long to transfer that there is a fast method, employing a
lookuptable, that ppmtomitsu will use if there is a maximum of 256 colors in the pixmap.
ppmtomitsu will try to position your image to the center of the paper, and will rotate
your image for you if xsize is larger than ysize. If your image is larger than the media
allows, ppmtomitsu will quit with an error message. (We decided that the media were too
expensive to have careless users produce misprints.) Once data transmission has started,
the job can't be stopped in a sane way without resetting the printer. The printer
understands putting together images in the printers memory; ppmtomitsu doesn't utilize
this as pnmcat etc provide the same functionality and let you view the result on-screen,
too. The S340-10 is the lowest common denominator printer; for higher resolution printers
there's the dpi300 option. The other printers also support higher values for enlarge eg,
but I don't think that's essential enough to warrant a change in the program.
-sharpness 1-4
'sharpness' designation. Default is to use the current sharpness.
-enlarge 1-3
Enlarge by a factor; Default is 1 (no enlarge)
-media A, A4, AS, A4S
Designate the media you're using. Default is 1184 x 1350, which will fit on any
media. A is 1216 x 1350, A4 is 1184 x 1452, AS is 1216 x 1650 and A4S is 1184 x
1754. A warning: If you specify a different media than the printer currently has,
the printer will wait until you put in the correct media or switch it off.
-copy 1-9
The number of copies to produce. Default is 1.
-dpi300
Double the number of allowed pixels for a S3600-30 Printer in S340-10 compatibility
mode. (The S3600-30 has 300 dpi).
-tiny Memory-safing, but always slow. The printer will get the data line-by-line in
24bit. It's probably a good idea to use this if your machine starts paging a lot
without this option.
REFERENCES
Mitsubishi Sublimation Full Color Printer S340-10 Specifications of Parallel Interface
LSP-F0232F
Use ppmtomitsu online using onworks.net services
