psvelogmt - Online in the Cloud

PROGRAM:

NAME

psvelo - Plot velocity vectors, crosses, and wedges on maps

SYNOPSIS

psvelo [ table ] parameters region [ parameters ] [ [p|s]parameters ] [ color ] [ color ]
[ color ] [ ] [ ] [ ] [ ] [ ] [ symbol/scale/conf/font_size ] [ [
[just/dx/dy/][c|label] ] [ [level] ] [ pen ] [ x_offset ] [ y_offset ] [ -ccopies ] [
-di<nodata> ] [ -h<headers> ] [ -i<flags> ] [ -:[i|o] ]

Note: No space is allowed between the option flag and the associated arguments.

DESCRIPTION

psvelo reads data values from files [or standard input] and generates PostScript code that
will plot velocity arrows on a map. Most options are the same as for psxy, except -S. The
PostScript code is written to standard output. The previous version (psvelomeca) is now
obsolete. It has been replaced by psvelo and psmeca.

REQUIRED ARGUMENTS

table One or more ASCII (or binary, see -bi[ncols][type]) data table file(s) holding a
number of data columns. If no tables are given then we read from standard input.

-Jparameters (more ...)
Select map projection.

-R[unit]west/east/south/north[/zmin/zmax][r]
west, east, south, and north specify the region of interest, and you may specify
them in decimal degrees or in [+-]dd:mm[:ss.xxx][W|E|S|N] format. Append r if lower
left and upper right map coordinates are given instead of w/e/s/n. The two
shorthands -Rg and -Rd stand for global domain (0/360 and -180/+180 in longitude
respectively, with -90/+90 in latitude). Alternatively for grid creation, give
Rcodelon/lat/nx/ny, where code is a 2-character combination of L, C, R (for left,
center, or right) and T, M, B for top, middle, or bottom. e.g., BL for lower left.
This indicates which point on a rectangular region the lon/lat coordinate refers
to, and the grid dimensions nx and ny with grid spacings via -I is used to create
the corresponding region. Alternatively, specify the name of an existing grid file
and the -R settings (and grid spacing, if applicable) are copied from the grid.
Using -Runit expects projected (Cartesian) coordinates compatible with chosen -J
and we inversely project to determine actual rectangular geographic region. For
perspective view (-p), optionally append /zmin/zmax. In case of perspective view
(-p), a z-range (zmin, zmax) can be appended to indicate the third dimension. This
needs to be done only when using the -Jz option, not when using only the -p option.
In the latter case a perspective view of the plane is plotted, with no third
dimension.

-S

Selects the meaning of the columns in the data file and the figure to be plotted.
-Sevelscale/confidence/fontsize.
Velocity ellipses in (N,E) convention. Vscale sets the scaling of the velocity
arrows. This scaling gives inches (unless c, i, or p is appended). Confidence sets
the 2-dimensional confidence limit for the ellipse, e.g., 0.95 for 95% confidence
ellipse. Fontsize sets the size of the text in points. The ellipse will be filled
with the color or shade specified by the option [default transparent]. The arrow
and the circumference of the ellipse will be drawn with the pen attributes
specified by the option. Parameters are expected to be in the following columns:
1,2: longitude, latitude of station (-: option interchanges order) 3,4:
eastward, northward velocity (-: option interchanges order) 5,6: uncertainty of
eastward, northward velocities (1-sigma) (-: option interchanges order) 7:
correlation between eastward and northward components 8: name of station
(optional).

-Snbarscale.
Anisotropy bars. Barscale sets the scaling of the bars This scaling gives inches
(unless c, i, or p is appended). Parameters are expected to be in the following
columns:
1,2: longitude, latitude of station (-: option interchanges order) 3,4:
eastward, northward components of anisotropy vector (-: option interchanges
order)

-Srvelscale/confidence/fontsize
Velocity ellipses in rotated convention. Vscale sets the scaling of the velocity
arrows. This scaling gives inches (unless c, i, or p is appended). Confidence sets
the 2-dimensional confidence limit for the ellipse, e.g., 0.95 for 95% confidence
ellipse. Fontsize sets the size of the text in points. The ellipse will be filled
with the color or shade specified by the option [default transparent]. The arrow
and the circumference of the ellipse will be drawn with the pen attributes
specified by the option. Parameters are expected to be in the following columns:
1,2: longitude, latitude, of station (-: option interchanges order) 3,4:
eastward, northward velocity (-: option interchanges order) 5,6: semi-major,
semi-minor axes 7: counter-clockwise angle, in degrees, from horizontal axis to
major axis of ellipse. 8: name of station (optional)

-Swwedge_scale/wedge_mag.
Rotational wedges. Wedge_scale sets the size of the wedges in inches (unless c, i,
or p is appended). Values are multiplied by Wedge_mag before plotting. For example,
setting Wedge_mag to 1.e7 works well for rotations of the order of 100
nanoradians/yr. Use -G to set the fill color or shade for the wedge, and -E to set
the color or shade for the uncertainty. Parameters are expected to be in the
following columns:
1,2: longitude, latitude, of station (-: option interchanges order) 3: rotation
in radians 4: rotation uncertainty in radians

-Sxcross_scale
gives Strain crosses. Cross_scale sets the size of the cross in inches (unless c,
i, or p is appended). Parameters are expected to be in the following columns:
1,2: longitude, latitude, of station (-: option interchanges order) 3: eps1, the
most extensional eigenvalue of strain tensor, with extension taken positive. 4:
eps2, the most compressional eigenvalue of strain tensor, with extension taken
positive. 5: azimuth of eps2 in degrees CW from North.

OPTIONAL ARGUMENTS

-Aparameters
Modify vector parameters. For vector heads, append vector head size [Default is
9p]. See Vector Attributes for specifying additional attributes.

-B[p|s]parameters (more ...)
Set map boundary intervals.

-DSigma_scale
can be used to rescale the uncertainties of velocities (-Se and -Sr) and rotations
(-Sw). Can be combined with the confidence variable.

-Ffill Sets the color or shade used for frame and annotation. [Default is black]

-Efill Sets the color or shade used for filling uncertainty wedges (-Sw) or velocity error
ellipses (-Se or -Sr). [If -E is not specified, the uncertainty regions will be
transparent.]

-Gfill Specify color (for symbols/polygons) or pattern (for polygons) [Default is black].
Optionally, specify -Gpicon_size/pattern, where pattern gives the number of the
image pattern (1-90) OR the name of a icon-format file. icon_size sets the unit
size in inches. To invert black and white pixels, use -GP instead of -Gp. See the
CookBook for information on individual patterns.

-K (more ...)
Do not finalize the PostScript plot.

-L Draw lines. Ellipses and fault planes will have their outlines drawn using current
pen (see -W).

-N Do NOT skip symbols that fall outside the frame boundary specified by -R. [Default
plots symbols inside frame only].

-O (more ...)
Append to existing PostScript plot.

-P (more ...)
Select "Portrait" plot orientation.

-U[just/dx/dy/][c|label] (more ...)
Draw GMT time stamp logo on plot.

-V[level] (more ...)
Select verbosity level [c].

-W Set pen attributes for velocity arrows, ellipse circumference and fault plane
edges. [Defaults: width = default, color = black, style = solid].

-X[a|c|f|r][x-shift[u]]

-Y[a|c|f|r][y-shift[u]] (more ...)
Shift plot origin.

-ccopies (more ...)
Specify number of plot copies [Default is 1].

-dinodata (more ...)
Replace input columns that equal nodata with NaN.

-h[i|o][n][+c][+d][+rremark][+rtitle] (more ...)
Skip or produce header record(s).

-icols[l][sscale][ooffset][,...] (more ...)
Select input columns (0 is first column).

-:[i|o] (more ...)
Swap 1st and 2nd column on input and/or output.

-^ or just -
Print a short message about the syntax of the command, then exits (NOTE: on Windows
use just -).

-+ or just +
Print an extensive usage (help) message, including the explanation of any
module-specific option (but not the GMT common options), then exits.

-? or no arguments
Print a complete usage (help) message, including the explanation of options, then
exits.

--version
Print GMT version and exit.

--show-datadir
Print full path to GMT share directory and exit.

VECTOR ATTRIBUTES

Several modifiers may be appended to the vector-producing options to specify the placement
of vector heads, their shapes, and the justification of the vector. Below, left and right
refers to the side of the vector line when viewed from the start point to the end point of
the segment:
+aangle sets the angle of the vector head apex [30].

+b places a vector head at the beginning of the vector path [none]. Optionally, append
t for a terminal line, c for a circle, or a for arrow [Default]. Further append l|r to
only draw the left or right side of this head [both sides].

+e places a vector head at the end of the vector path [none]. Optionally, append t for
a terminal line, c for a circle, or a for arrow [Default]. Further append l|r to only
draw the left or right side of this head [both sides].

+g-|fill turns off vector head fill (if -) or sets the vector head fill [Default fill
is used, which may be no fill].

+l draws half-arrows, using only the left side of specified heads [both sides].

+m places a vector head at the mid-point the vector path [none]. Append f or r for
forward or reverse direction of the vector [forward]. Optionally, append t for a
terminal line, c for a circle, or a for arrow head [Default]. Further append l|r to
only draw the left or right side of this head [both sides]. Cannot be combined with +b
or +e.

+nnorm scales down vector attributes (pen thickness, head size) with decreasing length,
where vectors shorter than norm will have their attributes scaled by length/norm [arrow
attributes remains invariant to length].

+oplon/plat specifies the oblique pole for the great or small circles. Only needed for
great circles if +q is given.

+p[-][pen] sets the vector pen attributes. If pen has a leading - then the head outline
is not drawn. [Default pen is used, and head outline is drawn]

+q means the input angle, length data instead represent the start and stop opening
angles of the arc segment relative to the given point.

+r draws half-arrows, using only the right side of specified heads [both sides].

t[b|e]trim will shift the beginning or end point (or both) along the vector segment by
the given trim; append suitable unit. If the modifiers b|e are not used then trim may
be two values separated by a slash, which is used to specify different trims for the
two ends. Positive trims will shorted the vector while negative trims will lengthen it
[no trim].

In addition, all but circular vectors may take these modifiers:
+jjust determines how the input x,y point relates to the vector. Choose from beginning
[default], end, or center.

+s means the input angle, length is instead the x, y coordinates of the vector end
point.

Finally, Cartesian vectors may take these modifiers:
+zscale[unit] expects input dx,dy vector components and uses the scale to convert to
polar coordinates with length in given unit.

EXAMPLES

The following should make big red arrows with green ellipses, outlined in red. Note that
the 39% confidence scaling will give an ellipse which fits inside a rectangle of dimension
Esig by Nsig.

gmt psvelo << END -h2 -R-10/10/-10/10 -W0.25p,red -Ggreen -L -Se0.2/0.39/18 \
-B1g1 -Jx0.4/0.4 -A0.3p -P -V > test.ps
#Long. Lat. Evel Nvel Esig Nsig CorEN SITE
#(deg) (deg) (mm/yr) (mm/yr)
0. -8. 0.0 0.0 4.0 6.0 0.500 4x6
-8. 5. 3.0 3.0 0.0 0.0 0.500 3x3
0. 0. 4.0 6.0 4.0 6.0 0.500
-5. -5. 6.0 4.0 6.0 4.0 0.500 6x4
5. 0. -6.0 4.0 6.0 4.0 -0.500 -6x4
0. -5. 6.0 -4.0 6.0 4.0 -0.500 6x-4
END

This example should plot some residual rates of rotation in the Western Transverse Ranges,
California. The wedges will be dark gray, with light gray wedges to represent the 2-sigma
uncertainties.

gmt psvelo << END -Sw0.4/1.e7 -W0.75p -Gdarkgray -Elightgray -h1 -D2 -Jm2.2 \
-R240./243./32.5/34.75 -Bf10ma60m/WeSn -P > test.ps
#lon lat spin(rad/yr) spin_sigma (rad/yr)
241.4806 34.2073 5.65E-08 1.17E-08
241.6024 34.4468 -4.85E-08 1.85E-08
241.0952 34.4079 4.46E-09 3.07E-08
241.2542 34.2581 1.28E-07 1.59E-08
242.0593 34.0773 -6.62E-08 1.74E-08
241.0553 34.5369 -2.38E-07 4.27E-08
241.1993 33.1894 -2.99E-10 7.64E-09
241.1084 34.2565 2.17E-08 3.53E-08
END

Use psvelogmt online using onworks.net services