rxgen - Online in the Cloud

PROGRAM:

NAME

rxgen - Stub generator for the Rx remote procedure call package

SYNOPSIS

rxgen [-h | -c | -C | -S | -r] [-dkpR]
[-I dir] [-P prefix] [-o outfile] [infile]

rxgen -s transport [-o outfile] [infile]

rxgen -l [-o outfile] [infile]

rxgen -m [-o outfile] [infile]

DESCRIPTION

rxgen is a tool that generates C code to implement the Rx RPC protocol; it takes as input
a description of an application interface similar to C and produces a number of server
and/or client stub routines to be linked with RPC-based programs. These stubs allow
programs to invoke remote procedures through local procedure calls. rxgen is an extension
of Sun's rpcgen (version 3.9) and retains full rpcgen functionality (at least as of that
version). Please refer to rpcgen(1) for more details on the Sun's RPC specific flags, and
to the RPC programming guide regarding the RPC language along with useful examples.

OPTIONS

rxgen operates in several different modes. The generated output files can be produced
individually (using one of -h, -c, -C, or -S) or collectively. All output files are
created when the default is used (i.e., no options), or the output is limited to the
server stubs (-C and -S) when the -r flag is used. The following describes the types of
generated output files (for simplicity, filename refers to the main output filename):

-h Generate C data definitions (a header file) from standard RPCL definitions (default
extension: filename.h).

-c Compile the XDR routines required to serialize the protocol described by RPCL.
Generate XDR routines for all declarations (default extension: filename.xdr.c).

-C Generate all the client-side stub routines (default extension: filename.cs.c).
Calling a routine in this file will cause the arguments to be packed up and sent via
Rx (or R).

-S Generate all the server-side stub routines (default extension: filename.ss.c).
Arguments are unpacked, and the corresponding server routine is called.

-r Generate the two default extension files produced by the -C and -S options.

The following options can be used on any combination of rxgen calls:

-R Generate code for the older \R protocol, as opposed to Rx, which is the default.

-k Must be specified when the generated code is intended to be used by the kernel;
special "includes" and other specifics are produced when the target output is for the
kernel.

-p Package combination flag: when multiple packages are included within a single
specification file, a single Execute Request routine will be used for all of them as a
result of this flag. The default is to generate individual Execute Request stubs for
each package.

-I dir
Similar to the -I flag in the C compiler (cc). This flag is passed to the pre-
processor (cpp) so that directory dir is searched before the standard lookup list for
#include files. As expected, multiple -I flags can be used simultaneously.

-P prefix
The prefix string following this switch is prepended to all generated output files;
useful when multiple runs want to produce different versions of the same interface
(say, kernel and non-kernel versions).

-d Debugging mode; only needed when rxgen is to be debugged (say, via dbx).

-o outfile
Specify the name of the output file. If none is specified, the standard output is
used (-c, -h, -C, and -S modes only). Note that if an output file is specified in a
multi-output file option (such as the default, or with option -r), then the outfile
replaces the name generated by default (which is based on the configuration's main
file name).

The -s, -l, and -m options are present only for rpcgen support. See rpcgen(1) for
information on their use.

rxgen SYNTAX SUMMARY

Specification file:

<Package description option> |
<Prefix description option> |
<StartingOpcode description option> |
<SplitPrefix description option> |
<Procedure description option> |
<RPCL language description option>

<Package description option>:

"package" <Package_ident>

<Prefix description option>:

"prefix" <Prefix_ident>

<StartingOpcode description option>:

"startingopcode" <constant>

<SplitPrefix description option>:

"splitprefix" <split options> ";"

<Split options>:

"IN =" <Start_prefix_ident> "|"
"OUT =" <End_prefix_ident> "|"
<Split options>

<Procedure description option>:

["proc"] [<Procedure_ident>] [<ServerStub_ident>]
<Argument list> ["split" | "multi"]
["=" <Opcode_ident>] ";"

<Argument list>:

"(" <Argument definition> <Comma_joined argument> ")"

<Argument definition>:

<Direction option> <Standard RPCL type decl> <Arg_ident>
["<" <Max_size> ">" | "[" <Max_size> "]"] | NULL

<Comma_joined argument>:

"," <Argument definition> | NULL

<Direction option>:

"IN" | "OUT" | "INOUT" | NULL

<Max_size>:

<constant> | NULL

<Package_ident>:
<Prefix_ident>:
<String_ident>:
<Start_prefix_ident>:
<End_prefix_ident>:
<Procedure_ident>:
<ServerStub_ident>:
<Arg_ident>:
<Opcode_ident>:

<identifier>

<RPCL language description option>:
<Standard RPCL type decl>:

Sun's RPCL language syntax (see rpcgen(1))

rxgen COMMANDS

Comments and Preprocessing
The input interface may contain preprocessor directives which are passed through the C
preprocessor (i.e. "cpp"). Since the preprocessor runs on all input files before they are
actually interpreted by rxgen, all cpp directives (#include, #ifdefs, #defines, etc.) are
legal and welcomed within an rxgen input file. Of course, none of these preprocessor
directives will be included in any of the generated files. To facilitate distinctions
between the different types of output files, rxgen defines certain special cpp symbols for
use by the rxgen programmer. These are RPC_HDR (defined when compiling into header,
filename.h, files), RPC_XDR (defined when compiling into xdr, filename.xdr.c, files),
RPC_CLIENT (defined when compiling into client stubs, filename.cs.c, files), and
RPC_SERVER (defined when compiling into server stubs, filename.ss.c, files).

In addition, rxgen does a little preprocessing of its own. Any line beginning with "%" is
passed directly into the output file, uninterpreted by rxgen. For a more heavy en masse
dumping of uninterpreted code, it would be advised to include all such code in an
"#include" file and pass it in preceded by "%". The input interface may also contain any
C-style comments which are, of course, ignored. Interpretation is token-based, thus
special line-orientation of separate statements is not necessary. rxgen also provides a
quite rich and helpful set of error reports, identifying them by exact line location and
error type. Also, rxgen will automatically generate #include lines for standard include
files, such as rx/xdr.h and rx/rx.h, along with the generated header file from this
interface.

Prefixing stub procedures
The package statement tells rxgen the name of the interface package. It is used for
prefixing the naming of all generated stub routines and the execute request procedure.
For example:

package AFS_

causes the execute request procedure to be named AFS_ExecuteRequest (Warning: in the older
version an additional "_" was appended after the package name to the ExecuteRequest name;
thus make sure you don't have an ExecuteRequest interface routine) and a given stub
routine, say Fetch, to be actually named AFS_Fetch. Multiple package statements (current
maximum size is 10) per configuration are permitted and are useful when multiple sets of
interfaces are implemented (see the example at the end). Note that in such cases, use of
the -p flag results in the generation of just one ExecuteRequest procedure which
recognizes the multiple interfaces and whose name is prefixed by the first package
statement. In the default case, independent ExecuteRequest procedures will be created for
each packaged group of remote procedure calls.

The prefix statement supplies a name to prepend to all calls to remote procedure names in
the ExecuteRequest stub routine. It is useful when the server makes RPC calls to other
servers (say, for debugging purposes). For example:

prefix S

causes the name "S" to be prepended to the name of all routines called from the server
stubs. The server can then call the original name and get the client stubs.

rxgen procedure declaration
The proc statement is the most common (and meaningful) in the rxgen interface. Its syntax
description is:

[proc] [<proc_name>] [<server_stub>] (<arg>, ..., <arg>)
[split | multi] [= <opcode>] ;

where:

· "proc" is an optional prefix of the procedure statement. This is just a stylistic item
and not a required procedure delimiter.

· <proc_name> is the name of the procedure. Note that even the name of the procedure is
optional. This only makes sense when the name of the given procedure is identical to
the name of the last package statement (i.e., "package RCallBack" and the declaration of
the "RCallBack" procedure).

· <server_stub>, if present, causes the ExecuteRequest procedure to call that stub instead
of the automatically generated stub when a call with that opcode is decoded.

· <opcode> is a constant or symbol that is the opcode for that procedure. One might use
the preprocessor features (i.e., #define), the const RPC-language feature, or the old
good constants as opcodes. Some further evaluation/processing of opcodes is done.
Particularly, checks for duplicate and non-existent opcodes are performed, along with
checks for "holes" (i.e., gaps in consecutive opcodes) in the opcode sequences. For
example, we use the fact that when "holes" in opcodes exist, the ExecuteRequest
procedure uses the case statement rather than the faster (and smaller, codewise) indexed
array method.

Also, rxgen defines (i.e., appends to the header file) three valuable macros for each
package group: <package-name>LOWEST_OPCODE, <package-name>HIGHEST_OPCODE, and
<package-name>NUMBER_OPCODES. These may be useful to the rxgen programmer. Also,
notice that the opcode statement is an optional feature, and can be omitted. In such
cases, automatic opcode numbers are generated sequentially, starting from 0.

One can change the initial opcode number by using the startingopcode (for lack of a
better name) rxgen command. Its syntax is:

startingopcode <constant>

where <constant> must be reasonable! Note that one can not mix procedures, some with
opcodes and some without, nor allow opcodes after the specification of the
startingopcode statement. rxgen will complain in all such cases.

· The argument entry represents a given parameter of the procedure. Its syntax is:

[IN | INOUT | OUT | <null>] <type_decl> <arg_name>
[<max>|<>|[max]|[]]

If the type is an indirect type (i.e., is followed by *), it is assumed that the pointer
should be followed one level and the data pointed to is to be transmitted. This should
normally be used for all structures/arrays and out parameters. A noticeable exception
is when explicit array/structure maximum size is given; since no array-of-pointer
declarations are allowed one should use typedefs to achieve the similar effect. The
parameters could be input parameters (preceded by IN), output parameters (preceded by
OUT), or input/output parameters (preceded by INOUT). If not specified, then the
direction of the previous parameter in the procedure is used. (Note: the first
parameter must be preceded by the directional primitive!)

· "split" is a hack to handle stub routines that do things such as file transfers or any
other operation that has to exchange information (e.g., length of a file) before the
call returns its output parameters. Because of the particular handshake that is
involved when doing remote file transfer, we currently break all such calls into two
client-side stub routines. The first (with the default prefix of "Begin") is used to
pass all IN and INOUT parameters to the server side. The second (with the default
prefix of "End") is used to get back the INOUT and OUT parameters from the server.
Between the two calls, the user is supposed to do the appropriate calls for the file
transfer. For example, the following procedure declaration in package AFS_

Fetch (IN a, b,INOUT c, OUT d) split = FETCHOPCODE;

will roughly generate the two independent client stub routines:

BeginAFS_Fetch (IN a, b, c)

and

EndAFS_Fetch(OUT c, d)

The splitprefix statement is used to change the default prefix names used by the two
client-side stub generated routines when dealing with file transfer-related procedure
calls. For example:

splitprefix IN=Before_ OUT=After_

will cause the naming of the two client stubs for a file transfer-related routine, say
Fetch(), to be Before_AFS_Fetch() and After_AFS_Fetch(), respectively.

· The "multi" option is nearly identical to the "split" feature described above. The only
significant visible difference is that along with the two client stubs, the standard
client stub is also generated. Since the intention is to handle the multi-Rx calls, we
need the whole standard procedure stub in the cases where no multi-Rx call of the
procedure is performed. A side effect of the "multi" option is the generation of a
special macro (i.e., "multi_<Procedure-name>" which passes back as arguments the "Begin"
and "End" stubs in the header output file. This macro is used directly by the Rx code
when a multi-Rx call of this procedure is performed.

OBSOLETE rxgen FEATURES
Although the following rxgen commands are still in effect, they will soon be removed since
there are better alternatives. DO NOT USE THEM!

The special statement is a temporary hack used to handle certain inefficiencies of
standard xdr routines to handle some user-customized declarations. In particular, this
applies to a string pointer specified as part of a declaration. For example,

special struct BBS SeqBody;

tells rxgen that the entry "SeqBody" in the user-defined BBS xdr routine is a string (note
that more than one string can be "special" per structure -- multiple ones are separated by
commas); it will thus allocate and de-allocate space properly in the server-generated
stubs that contain this structure as an IN or INOUT parameter.

A better alternative to special is the customized statement, which is simply the
"customized" token followed by the regular declaration of a struct based on the RPCL
rules. In this case, the declaration will be included in the generated header file (-h
option) but no xdr routine will be generated for this structure -- the user will supply
this. All pointer entries in this structure will be remembered so when the structure is
used as an IN or INOUT in the server stub, no core leaks will occur. For example,
consider

customized struct CBS {
long Seqlen;
char *SeqBody;
}

The "xdr_CBS" routine would be provided by the user where during the DECODE xdr opcode,
appropriate space for the "SeqBody" string is allocated. Similarly, that space is freed
during the FREE xdr opcode.

Note: Old style "Array parameter specifications" are not supported any more.

EXAMPLES

In case there are some requirements not available by the current RPC language, one can
customize some XDR routines by leaving those data types undefined. For every data type
that is undefined, it will be assumed that a routine exists with the name "xdr_" prepended
to it. A selected set of rxgen features is presented below, but for a more comprehensive
one (unions, complex examples, etc) please refer to the rpcgen Programming Guide and
eXternal Data Representation: Sun Technical Notes.

Typedefs
The RPC typedef statement is identical to the C typedef (i.e. "typedef <declaration>").
By default, most user declarations (i.e. structs, unions, etc) are automatically
typedef'ed by rxgen. Since it makes parsing simpler, its usage is recommended by rxgen
scripts.

Strings
The C "char *" string convention is kind of ambiguous, since it is usually intended to
mean a null-terminated string of characters, but it could also represent a pointer to a
single character, a pointer to an array of characters, etc. In the RPC language, a null-
terminated string is unambiguously called a "string". Examples,

string bigname<>;
string name<MAXNAMELEN>;
typedef string volname<MAXVOLNAME>;

Notice that the maximum size of string can be arbitrary (like "bigname" above) or,
preferably, or specified in angle brackets (i.e. "name" and "volname" above). In
practice, one should always use only bounded strings in interfaces. A sample calling proc
using the declarations above would be:

GetEntryByName (IN volname name,
OUT struct vldbentry *entry) = VL_GETENTRYBYNAME;

or, of course,

GetEntryByName (IN string volname<MAXVOLNAME>,
OUT struct vldbentry *entry) = VL_GETENTRYBYNAME;

It is very important for the user to understand when the string parameters should be
allocated and/or freed by the his/her client and/or server programs. A short analysis on
string parameters handling follows (note that a similar method is used for the handling of
variable length arrays as it will be shown later on):

· In the client side: IN and INOUT string parameters are the programmer's responsibility
and should be allocated (static or via malloc) before calling the rpc and freed (if
malloc was used) after the rpc's return in the user's client program; of course, for
INOUT parameters, the returned string can't be bigger than the malloced input string.

OUT string parameters are automatically malloced (based on the length of the returned
string and not the maxsize) by the rxgen client stubs (in filename.cs.c) and must be
freed by the client program; admittedly, this could be somewhat confusing since the user
needs to free something that he/she didn't allocate.}

· In the server side: IN and INOUT string parameters are automatically malloced (based on
the size of incoming strings) by the rxgen server stubs (in filename.ss.c) before they
are passed to the user's server procedure; that space is automatically freed just before
the rxgen server stub returns; therefore the user need not do anything special for IN
and INOUT string parameters.

OUT string parameters must be malloced by the user's server procedure (i.e. null pointer
is passed to it by the rxgen server stub) and it is automatically freed at the end of
the rxgen server stub. Like in the client side, the OUT parameters are somewhat
unorthodox (i.e. the server routine must malloc a string without ever freeing it itself;
this is done by the rxgen server stub).

Note that for INOUT and OUT string parameters, in both the client and server sides their
arguments must be char of pointers (i.e. char **).

Pointers
Pointer declarations in RPC are also exactly as they are in C (i.e. "struct
single_vldbentry *vldblist;"). Of course, one can't send pointers over the network, but
one can use XDR pointers for sending recursive data types such as lists and trees (an
example of a linked list will be demonstrated shortly).

Arrays
Fixed arrays are just like standard C array declarations (i.e. "struct UpdateEntry
entries[20]") without any side effect problems in rxgen. Since variable-length arrays have
no explicit syntax in C, the angle-brackets are used for it and the array declarations are
actually compiled into "struct"s. For example, declarations such as:

const MAXBULKSIZE = 10000;
const MAXENTRIES = 100;
opaque bulk<MAXBULKSIZE>; /* At most 10000 items */
int hosts<>; /* any number of items */
typedef vldbentry blkentries<100>; /* Preferable array decl */

are compiled into the following structs:

struct {
u_int bulk_len; /* no of items */
char *bulk_val; /* pointer to array */
} bulk;

for the "bulk" array, and similarly for the "blkentries<100>" array,

struct {
u_int blkentries_len; /* no of items in array */
vldbentry *blkentries_val; /* pointer to array */
} blkentries;

Therefore the user should be aware of the "magically" generated structure entries such as
the number of items in the array (<array_name>_len) and the pointer to the array
(<array_name>_val) since some of the entries will have to be filled in from the
client/server programs. A sample proc would be:

typedef vldbentry blkentries<MAXENTRIES>;
proc GetBlk (OUT blkentries *vlentries) = VL_GETBLK;

or, more directly,

GetBlk(OUT vldbentry vlentries<MAXENTRIES>) = VL_GETBLK;

Note that although the latest method is preferable since one does not have to first use
the typedef statement (and admittedly, programmers prefer avoiding typedefs), one should
realize that rxgen does the structure expansion and the xdr creation implicitly; therefore
the user should be aware of the "vldbentries_val" and "vldbentries_len" fields as before
(see following examples).

Array example I (least desirable)

Procedure declaration in the interface configuration:

proc ListAttributes (IN vldblistbyattributes *attributes,
INOUT blkentries *vldbentries) = VL_LISTATTRIBUTES;

Sample CLIENT code:

blkentries entries, *pnt;
entries.blkentries_len = 10; /* max # returned entries */
entries.blkentries_val = (vldbentry *)malloc(LEN);
/* It must be set */

code = VL_ListAttributes(&attributes, &entries);
if (!code) {
pnt = entries.blkentries_val;
for (i=0; i < entries.blkentries_len; i++, pnt++)
display_vldbentry(pnt);
/* Make sure you free the allocated space */
free((char *)entries.blkentries_val);
}

Sample SERVER code:

VL_ListAttributes(attributes, entries)
{
vldbentry *singleentry = entries->blkentries_val;
entries->blkentries_len = 0;

while (copy_to_vldbentry(&vlentry, singleentry))
singleentry++, vldbentries->entries_len++;
}

Although this method for variable-size arrays works fine, there are some major drawbacks.
The array parameter (i.e. vldbentries above) must be declared as INOUT since we need to
pass the max length of the expected returned array; more importantly, a big (depending on
the value of "_len") chunk of junk code is going to be transferred to the server as result
of the IN(out) side-effect of the array. It's an easy and convenient method if the
returned array size can be predicted from the start and when the size is quite high. This
method is included as an example of erroneous use (and abuse) of rxgen and should not be
used.

Array example II (Desirable method)

Procedure declaration in the interface configuration (using Example I above):

proc ListAttributes (IN vldblistbyattributes *attributes,
OUT blkentries *vldbentries) = VL_LISTATTRIBUTES;

Sample CLIENT code:

blkentries entries, *pnt;

code = VL_ListAttributes(&attributes, &entries);
if (!code) {
pnt = entries.blkentries_val;
for (i=0; i < entries.blkentries_len; i++, pnt++)
display_vldbentry(pnt);
/* Make sure you free the allocated space (by rxgen) */
free((char *)entries.blkentries_val);
}

Sample SERVER code:

VL_ListAttributes(attributes, entries)
{
vldbentry *singleentry;
entries->blkentries_len = 0;
singleentry = entries->blkentries_val
= (vldbentry *)malloc(MAXENTRIES * sizeof(vldbentry));

while (copy_to_vldbentry(&vlentry, singleentry))
singleentry++, vldbentries->entries_len++;
}

This is the best (and simplest) way of using variable-size arrays as an output parameter.
It is the responsibility of the server-side stub to malloc() the adequate space which is
automatically freed by the rxgen stub; the client side should free the space allocated by
the rxgen-calling stub.

Array example III (Linked Lists)

Considering the following 3 declarations (could have applied some optimizations) in the
configuration file:

typedef struct single_vldbentry *vldblist;
struct single_vldbentry {
vldbentry vlentry;
vldblist next_vldb;
};

struct vldb_list {
vldblist node;
};

and the rxgen procedure declaration:

LinkedList (IN vldblistbyattributes *attributes,
OUT vldb_list *linkedentries) = VL_LINKEDLIST;

Sample CLIENT code:

vldb_list linkedvldbs;
vldblist vllist, vllist1;

bzero(&linkedvldbs, sizeof(vldb_list));
code = VL_LinkedList(&attributes, &nentries, &linkedvldbs);
if (!code) {
printf("We got %d vldb entries\n", nentries);
for (vllist = linkedvldbs.node; vllist; vllist = vllist1) {
vllist1 = vllist->next_vldb;
display_entry(&vllist->vlentry);
free((char *)vllist);
}
}

Sample SERVER code:

VL_LinkedList(rxcall, attributes, nentries, linkedvldbs);
{
vldblist vllist, *vllistptr = &linkedvldbs->node;
while (...) {
vllist = *vllistptr
= (single_vldbentry *)malloc (sizeof (single_vldbentry));
copy_to_vldbentry(&tentry, &vllist->vlentry);
nentries++;
vllistptr = &vllist->next_vldb;
};
*vllistptr = NULL;
}

Using a linked list offers many advantages: Nothing is passed to the server (the parameter
is OUT), no additional overhead is involved, and the caller doesn't have to explicitly
prepare for an arbitrary return size. A drawback is that the caller has the
responsibility of malloc() (on the server) and free (on the client) of each entry (to
avoid unwanted core-leaks). Another drawback is that since it's a recursive call, the C
stack will grow linearly with respect to the number of nodes in the list (so it's wise to
increase the Rx LWP stack if huge amounts of data are expected back -- default stack size
is 4K). The advantages should outweigh the disadvantages here.

It's important to pay attention to the comments of the three array examples above
particularly when they're references to when the user should allocate/free space for the
variable length arrays. The mechanism is very similar to the handling of strings thus you
might need to review the strings section above; note that the linked lists are handled
somewhat differently...

Miscellaneous examples
Below is an abbreviated version of a random interface file which shows some of the common
cases.

/* Declaration of all structures used by the R.xg script interface */

struct AFSFid {
unsigned long Volume;
unsigned long Vnode;
unsigned long Unique;
};

typedef long ViceDataType;

/* Note that TEST would be equivalent to "HEADER" only during the
processing of the header, *.h, file */

#ifdef RPC_HDR
#define TEST "HEADER"
#else
#define TEST "REST"
#endif

/* This is the standard *.xg specification file */

package AFS_
splitprefix IN=BEFORE_ OUT=AFTER_;
Prefix Test

proc Remove(IN struct AFSFid *Did, IN string volname<64>,
OUT struct AFSStatus *Status) = AFS_REMOVE;

DisconnectFS AUX_disconnectFS() = AFS_DISCONNECTFS;

proc GetVolumeInfo(IN string Vid,
OUT struct VolumeInfo *Info) = AFS_GETVOLUMEINFO;

/* You could have more than an interface per configuration */

package VOTE_

/* Using the "multi" feature; thus VOTE_Beacon can be called as an
multi-Rx call or as a regular call */

Beacon (IN long state, long voteStart,
net_version *version, net_tid *tid)
multi = VOTE_BEACON;

package DISK_

/* Using the "split" feature */

SendFile (IN long file, long offset,
long length, net_version *version)
split = DISK_SENDFILE;

Output of an actual interface configuration
We'll demonstrate some of the actual output generated by rxgen by following an abbreviated
actual interface configuration.

Configuration file

Contents of the interface configuration file (vldbint.xg):

package VL_
#include "vl_opcodes.h" /* The opcodes are included here */
%#include "vl_opcodes.h" /* directly to other places */

/* Current limitations on parameters that affect other packages
(i.e. volume) */

const MAXNAMELEN = 65;
const MAXNSERVERS = 8;
const MAXTYPES = 3;

/* External (visible) representation of an individual vldb entry */

struct vldbentry {
char name[MAXNAMELEN];
long volumeType;
long nServers;
long serverNumber[MAXNSERVERS];
long serverPartition[MAXNSERVERS];
long serverFlags[MAXNSERVERS];
u_long volumeId[MAXTYPES];
long flags;
};

typedef struct single_vldbentry *vldblist;
struct single_vldbentry {
vldbentry VldbEntry;
vldblist next_vldb;
};

struct vldb_list {
vldblist node;
};

/* vldb interface calls */

CreateEntry (IN long Volid,
vldbentry *newentry) = VLCREATEENTRY;

GetEntryByName (IN string volumename<MAXNAMELEN>,
OUT vldbentry *entry) = VLGETENTRYBYNAME;

GetNewVolumeId (IN long bumpcount,
OUT long *newvolumid) = VLGETNEWVOLUMEID;

ReplaceEntry (IN long Volid,
long voltype,
vldbentry *newentry,
long ReleaseType) multi = VLREPLACEENTRY;

ListAttributes (IN VldbListByAttributes *attributes,
OUT long *nentries,
OUT vldbentry bulkentries<MAXVLDBLEN>)
= VLLISTATTRIBUTES;

LinkedList (IN VldbListByAttributes *attributes,
OUT long *nentries,
OUT vldb_list *linkedentries) = VLLINKEDLIST;

We'll concentrate only on the Rx generated code since the R generated code (-R option)
will soon be obsolete. For a detailed description on the Rx-related calls inside the
generated stubs (i.e., rx_NewCall(), rx_EndCall()), along with details on what happens
inside certain calls (like xdrrx_create()) please refer to the Rx documentation. Typing
"rxgen vldbint.xg" will result in the creation of four files: vldbint.h, vldbint.xdr.c,
vldbint.cs.c and vldbint.ss.c. A closer look at these files follows.

Header file (vldbint.h)

/* Machine generated file -- Do NOT edit */

#include "vl_opcodes.h" /* directly to other places */
#define MAXNAMELEN 65
#define MAXNSERVERS 8
#define MAXTYPES 3

struct vldbentry {
char name[MAXNAMELEN];
long volumeType;
long nServers;
long serverNumber[MAXNSERVERS];
long serverPartition[MAXNSERVERS];
long serverFlags[MAXNSERVERS];
u_long volumeId[MAXTYPES];
long flags;
};
typedef struct vldbentry vldbentry;
bool_t xdr_vldbentry();

typedef struct single_vldbentry *vldblist;
bool_t xdr_vldblist();

struct single_vldbentry {
vldbentry VldbEntry;
vldblist next_vldb;
};
typedef struct single_vldbentry single_vldbentry;
bool_t xdr_single_vldbentry();

struct vldb_list {
vldblist node;
};
typedef struct vldb_list vldb_list;
bool_t xdr_vldb_list();

#include <rx/rx_multi.h>
#define multi_VL_ReplaceEntry(Volid, voltype, newentry, ReleaseType) \
multi_Body(StartVL_ReplaceEntry(multi_call, Volid, voltype,
newentry, ReleaseType), EndVL_ReplaceEntry(multi_call))

typedef struct bulkentries {
u_int bulkentries_len;
vldbentry *bulkentries_val;
} bulkentries;
bool_t xdr_bulkentries();

/* Opcode-related useful stats for package: VL_ */
#define VL_LOWEST_OPCODE 501
#define VL_HIGHEST_OPCODE 506
#define VL_NUMBER_OPCODES 6

Notice that all structures are automatically typedef'ed and all "const"s are converted to
"#define"s. Some data structures, such as bulkentries, are taken from procedure params
(from ListAttributes proc). Thus, this should be kept in mind when creating stubs
piecemeal with rxgen (i.e., using the -c, -h, -C, or -S flags). Also, one of the side
effects of the "multi" option (in "ReplaceEntry" proc) is the generation of the
"multi_VL_ReplaceEntry" above.

XDR routines for structures (vldbint.xdr.c)

/* Machine generated file -- Do NOT edit */

#include <rx/xdr.h>
#include "vldbint.h"

#include "vl_opcodes.h" /* directly to other places */

bool_t
xdr_vldbentry(xdrs, objp)
XDR *xdrs;
vldbentry *objp;
{
if (!xdr_vector(xdrs, (char *)objp->name, MAXNAMELEN,
sizeof(char), xdr_char))
return (FALSE);
if (!xdr_long(xdrs, &objp->volumeType))
return (FALSE);
if (!xdr_long(xdrs, &objp->nServers))
return (FALSE);
if (!xdr_vector(xdrs, (char *)objp->serverNumber, MAXNSERVERS,
sizeof(long), xdr_long))
return (FALSE);
if (!xdr_vector(xdrs, (char *)objp->serverPartition,
MAXNSERVERS, sizeof(long), xdr_long))
return (FALSE);
if (!xdr_vector(xdrs, (char *)objp->serverFlags, MAXNSERVERS,
sizeof(long), xdr_long))
return (FALSE);
if (!xdr_vector(xdrs, (char *)objp->volumeId, MAXTYPES,
sizeof(u_long), xdr_u_long))
return (FALSE);
if (!xdr_long(xdrs, &objp->flags))
return (FALSE);
return (TRUE);
}

bool_t
xdr_vldblist(xdrs, objp)
XDR *xdrs;
vldblist *objp;
{
if (!xdr_pointer(xdrs, (char **)objp,
sizeof(struct single_vldbentry),
xdr_single_vldbentry))
return (FALSE);
return (TRUE);
}

bool_t
xdr_single_vldbentry(xdrs, objp)
XDR *xdrs;
single_vldbentry *objp;
{
if (!xdr_vldbentry(xdrs, &objp->VldbEntry))
return (FALSE);
if (!xdr_vldblist(xdrs, &objp->next_vldb))
return (FALSE);
return (TRUE);
}

bool_t
xdr_vldb_list(xdrs, objp)
XDR *xdrs;
vldb_list *objp;
{
if (!xdr_vldblist(xdrs, &objp->node))
return (FALSE);
return (TRUE);
}

bool_t
xdr_bulkentries(xdrs, objp)
XDR *xdrs;
bulkentries *objp;
{
if (!xdr_array(xdrs, (char **)&objp->bulkentries_val,
(u_int *)&objp->bulkentries_len, MAXVLDBLEN,
sizeof(vldbentry), xdr_vldbentry))
return (FALSE);
return (TRUE);
}

Note that the xdr_bulkentries() is automatically generated as a side effect of a procedure
parameter declaration. Thus, if identical multiple type parameter declarations are used,
then multiply-defined xdr_* stubs will be created! We felt this was a better alternative
to having the rxgen programmer deal with types such as bulkentries_1, bulkentries_2...

Client-Side stub routines (vldbint.cs.c)

/* Machine generated file -- Do NOT edit */

#include <rx/xdr.h>
#include <rx/rx.h>
#include <afs/rxgen_consts.h>
#include "vldbint.h"

#include "vl_opcodes.h" /* directly to other places */

int VL_CreateEntry(z_conn, Volid, newentry)
register struct rx_connection *z_conn;
long Volid;
vldbentry * newentry;
{
struct rx_call *z_call = rx_NewCall(z_conn);
static int z_op = 501;
int z_result;
XDR z_xdrs;

xdrrx_create(&z_xdrs, z_call, XDR_ENCODE);

/* Marshal the arguments */
if ((!xdr_int(&z_xdrs, &z_op))
|| (!xdr_long(&z_xdrs, &Volid))
|| (!xdr_vldbentry(&z_xdrs, newentry))) {
z_result = RXGEN_CC_MARSHAL;
goto fail;
}

z_result = RXGEN_SUCCESS;
fail:
return rx_EndCall(z_call, z_result);
}

int VL_GetEntryByName(z_conn, volumename, entry)
register struct rx_connection *z_conn;
char * volumename;
vldbentry * entry;
{
struct rx_call *z_call = rx_NewCall(z_conn);
static int z_op = 504;
int z_result;
XDR z_xdrs;

xdrrx_create(&z_xdrs, z_call, XDR_ENCODE);

/* Marshal the arguments */
if ((!xdr_int(&z_xdrs, &z_op))
|| (!xdr_string(&z_xdrs, &volumename, 65))) {
z_result = RXGEN_CC_MARSHAL;
goto fail;
}

/* Un-marshal the reply arguments */
z_xdrs.x_op = XDR_DECODE;
if ((!xdr_vldbentry(&z_xdrs, entry))) {
z_result = RXGEN_CC_UNMARSHAL;
goto fail;
}

z_result = RXGEN_SUCCESS;
fail:
return rx_EndCall(z_call, z_result);
}

int VL_GetNewVolumeId(z_conn, bumpcount, newvolumid)
register struct rx_connection *z_conn;
long bumpcount;
long * newvolumid;
{
struct rx_call *z_call = rx_NewCall(z_conn);
static int z_op = 505;
int z_result;
XDR z_xdrs;

xdrrx_create(&z_xdrs, z_call, XDR_ENCODE);

/* Marshal the arguments */
if ((!xdr_int(&z_xdrs, &z_op))
|| (!xdr_long(&z_xdrs, &bumpcount))) {
z_result = RXGEN_CC_MARSHAL;
goto fail;
}

/* Un-marshal the reply arguments */
z_xdrs.x_op = XDR_DECODE;
if ((!xdr_long(&z_xdrs, newvolumid))) {
z_result = RXGEN_CC_UNMARSHAL;
goto fail;
}

z_result = RXGEN_SUCCESS;
fail:
return rx_EndCall(z_call, z_result);
}

int VL_ReplaceEntry(z_conn, Volid, voltype, newentry, ReleaseType)
register struct rx_connection *z_conn;
long Volid, voltype, ReleaseType;
vldbentry * newentry;
{
struct rx_call *z_call = rx_NewCall(z_conn);
static int z_op = 506;
int z_result;
XDR z_xdrs;

xdrrx_create(&z_xdrs, z_call, XDR_ENCODE);

/* Marshal the arguments */
if ((!xdr_int(&z_xdrs, &z_op))
|| (!xdr_long(&z_xdrs, &Volid))
|| (!xdr_long(&z_xdrs, &voltype))
|| (!xdr_vldbentry(&z_xdrs, newentry))
|| (!xdr_long(&z_xdrs, &ReleaseType))) {
z_result = RXGEN_CC_MARSHAL;
goto fail;
}

z_result = RXGEN_SUCCESS;
fail:
return rx_EndCall(z_call, z_result);
}

int StartVL_ReplaceEntry(z_call, Volid, voltype, newentry, ReleaseType)
register struct rx_call *z_call;
long Volid, voltype, ReleaseType;
vldbentry * newentry;
{
static int z_op = 506;
int z_result;
XDR z_xdrs;

xdrrx_create(&z_xdrs, z_call, XDR_ENCODE);

/* Marshal the arguments */
if ((!xdr_int(&z_xdrs, &z_op))
|| (!xdr_long(&z_xdrs, &Volid))
|| (!xdr_long(&z_xdrs, &voltype))
|| (!xdr_vldbentry(&z_xdrs, newentry))
|| (!xdr_long(&z_xdrs, &ReleaseType))) {
z_result = RXGEN_CC_MARSHAL;
goto fail;
}

z_result = RXGEN_SUCCESS;
fail:
return z_result;
}

int EndVL_ReplaceEntry(z_call)
register struct rx_call *z_call;
{
int z_result;
XDR z_xdrs;

z_result = RXGEN_SUCCESS;
fail:
return z_result;
}

int VL_ListAttributes(z_conn, attributes, nentries, bulkentries_1)
register struct rx_connection *z_conn;
VldbListByAttributes * attributes;
long * nentries;
bulkentries * bulkentries_1;
{
struct rx_call *z_call = rx_NewCall(z_conn);
static int z_op = 511;
int z_result;
XDR z_xdrs;

xdrrx_create(&z_xdrs, z_call, XDR_ENCODE);

/* Marshal the arguments */
if ((!xdr_int(&z_xdrs, &z_op))
|| (!xdr_VldbListByAttributes(&z_xdrs, attributes))) {
z_result = RXGEN_CC_MARSHAL;
goto fail;
}

/* Un-marshal the reply arguments */
z_xdrs.x_op = XDR_DECODE;
if ((!xdr_long(&z_xdrs, nentries))
|| (!xdr_bulkentries(&z_xdrs, bulkentries_1))) {
z_result = RXGEN_CC_UNMARSHAL;
goto fail;
}

z_result = RXGEN_SUCCESS;
fail:
return rx_EndCall(z_call, z_result);
}

int VL_LinkedList(z_conn, attributes, nentries, linkedentries)
register struct rx_connection *z_conn;
VldbListByAttributes * attributes;
long * nentries;
vldb_list * linkedentries;
{
struct rx_call *z_call = rx_NewCall(z_conn);
static int z_op = 512;
int z_result;
XDR z_xdrs;

xdrrx_create(&z_xdrs, z_call, XDR_ENCODE);

/* Marshal the arguments */
if ((!xdr_int(&z_xdrs, &z_op))
|| (!xdr_VldbListByAttributes(&z_xdrs, attributes))) {
z_result = RXGEN_CC_MARSHAL;
goto fail;
}

/* Un-marshal the reply arguments */
z_xdrs.x_op = XDR_DECODE;
if ((!xdr_long(&z_xdrs, nentries))
|| (!xdr_vldb_list(&z_xdrs, linkedentries))) {
z_result = RXGEN_CC_UNMARSHAL;
goto fail;
}

z_result = RXGEN_SUCCESS;
fail:
return rx_EndCall(z_call, z_result);
}

Notice the side effect of the "multi" feature (three different modules for "ReplaceEntry"
proc).

Server-Side stub routines (vldbint.ss.c)

/* Machine generated file -- Do NOT edit */

#include <rx/xdr.h>
#include <rx/rx.h>
#include <afs/rxgen_consts.h>
#include "vldbint.h"

#include "vl_opcodes.h" /* directly to other places */

long _VL_CreateEntry(z_call, z_xdrs)
struct rx_call *z_call;
XDR *z_xdrs;
{
long z_result;
long Volid;
vldbentry newentry;

if ((!xdr_long(z_xdrs, &Volid))
|| (!xdr_vldbentry(z_xdrs, &newentry))) {
z_result = RXGEN_SS_UNMARSHAL;
goto fail;
}

z_result = VL_CreateEntry(z_call, Volid, &newentry);
fail:
return z_result;
}

long _VL_GetEntryByName(z_call, z_xdrs)
struct rx_call *z_call;
XDR *z_xdrs;
{
long z_result;
char *volumename = (char *)0;
vldbentry entry;

if ((!xdr_string(z_xdrs, &volumename, 65))) {
z_result = RXGEN_SS_UNMARSHAL;
goto fail;
}

z_result = VL_GetEntryByName(z_call, &volumename, &entry);
z_xdrs->x_op = XDR_ENCODE;
if ((!xdr_vldbentry(z_xdrs, &entry)))
z_result = RXGEN_SS_MARSHAL;
fail:
z_xdrs->x_op = XDR_FREE;
if (!xdr_string(z_xdrs, &volumename, 65)) goto fail1;
return z_result;
fail1:
return RXGEN_SS_XDRFREE;
}

long _VL_GetNewVolumeId(z_call, z_xdrs)
struct rx_call *z_call;
XDR *z_xdrs;
{
long z_result;
long bumpcount;
long newvolumid;

if ((!xdr_long(z_xdrs, &bumpcount))) {
z_result = RXGEN_SS_UNMARSHAL;
goto fail;
}

z_result = VL_GetNewVolumeId(z_call, bumpcount, &newvolumid);
z_xdrs->x_op = XDR_ENCODE;
if ((!xdr_long(z_xdrs, &newvolumid)))
z_result = RXGEN_SS_MARSHAL;
fail:
return z_result;
}

long _VL_ReplaceEntry(z_call, z_xdrs)
struct rx_call *z_call;
XDR *z_xdrs;
{
long z_result;
long Volid, voltype, ReleaseType;
vldbentry newentry;

if ((!xdr_long(z_xdrs, &Volid))
|| (!xdr_long(z_xdrs, &voltype))
|| (!xdr_vldbentry(z_xdrs, &newentry))
|| (!xdr_long(z_xdrs, &ReleaseType))) {
z_result = RXGEN_SS_UNMARSHAL;
goto fail;
}

z_result = VL_ReplaceEntry(z_call, Volid, voltype, &newentry,
ReleaseType);
fail:
return z_result;
}

long _VL_ListAttributes(z_call, z_xdrs)
struct rx_call *z_call;
XDR *z_xdrs;
{
long z_result;
VldbListByAttributes attributes;
long nentries;
bulkentries bulkentries_1;

if ((!xdr_VldbListByAttributes(z_xdrs, &attributes))) {
z_result = RXGEN_SS_UNMARSHAL;
goto fail;
}

z_result = VL_ListAttributes(z_call, &attributes, &nentries,
&bulkentries_1);
z_xdrs->x_op = XDR_ENCODE;
if ((!xdr_long(z_xdrs, &nentries))
|| (!xdr_bulkentries(z_xdrs, &bulkentries_1)))
z_result = RXGEN_SS_MARSHAL;
fail:
z_xdrs->x_op = XDR_FREE;
if (!xdr_bulkentries(z_xdrs, &bulkentries_1)) goto fail1;
return z_result;
fail1:
return RXGEN_SS_XDRFREE;
}

long _VL_LinkedList(z_call, z_xdrs)
struct rx_call *z_call;
XDR *z_xdrs;
{
long z_result;
VldbListByAttributes attributes;
long nentries;
vldb_list linkedentries;

if ((!xdr_VldbListByAttributes(z_xdrs, &attributes))) {
z_result = RXGEN_SS_UNMARSHAL;
goto fail;
}

z_result = VL_LinkedList(z_call, &attributes, &nentries,
&linkedentries);
z_xdrs->x_op = XDR_ENCODE;
if ((!xdr_long(z_xdrs, &nentries))
|| (!xdr_vldb_list(z_xdrs, &linkedentries)))
z_result = RXGEN_SS_MARSHAL;
fail:
return z_result;
}

long _VL_CreateEntry();
long _VL_GetEntryByName();
long _VL_GetNewVolumeId();
long _VL_ReplaceEntry();
long _VL_ListAttributes();
long _VL_LinkedList();

static long (*StubProcsArray0[])() = {_VL_CreateEntry,
_VL_GetEntryByName, _VL_GetNewVolumeId, _VL_ReplaceEntry,
_VL_ListAttributes, _VL_LinkedList};

VL_ExecuteRequest(z_call)
register struct rx_call *z_call;
{
int op;
XDR z_xdrs;
long z_result;

xdrrx_create(&z_xdrs, z_call, XDR_DECODE);
if (!xdr_int(&z_xdrs, &op))
z_result = RXGEN_DECODE;
else if (op < VL_LOWEST_OPCODE || op > VL_HIGHEST_OPCODE)
z_result = RXGEN_OPCODE;
else
z_result = (*StubProcsArray0[op - VL_LOWEST_OPCODE])
(z_call, &z_xdrs);
return z_result;
}

If there were gaps in the procedures' opcode sequence the code for VL_ExecuteRequest()
routine would be have been drastically different (it would have been a case statement for
each procedure).

NOTES

rxgen is implemented from Sun's rpcgen utility. All of the standard rpcgen's
functionality is fully maintained. Note that some active rpcgen options that don't apply
to rxgen's purpose aren't referenced here (i.e., -s, -l, -m options) and the interested
reader should refer to rpcgen(1) for details.

When the "%#include <include file"> feature is used make sure that you don't have any
rxgen language features (i.e. %#defines) since you'll get syntax errors during
compilations..

Since this is an ongoing project many of the above may change/disappear without a major
warning.

Use rxgen online using onworks.net services