This is the command visolate that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
visolate - tool for engraving PCBs using CNCs
SYNOPSIS
visolate [options] [file]
DESCRIPTION
This manual page documents briefly the visolate command.
visolate reads the gerber files describing printed circuit boards and converts them into
the G-code (RS-274 code) needed to engrave they layout into a board using a CNC machine.
Precise renditions of the original layout can be created as well as voronoi fillings of
the original layout, shortening the toolpath.
OPTIONS
A summary of options is included below.
-a, --auto
Enable auto-mode. When in auto-mode, visolate will load the given file, follow the
usual steps (fix topology, generate toolpaths), save the toolpaths and exit
afterwards.
This is primarily intended for use in scripts; be aware that visolate still needs a
connected X display and a graphics card to do its calculations.
-absolute
Use absolute coordinates (instead of relative, which is the default).
-d, --dpi DPI
Do all calculations with a resolution of the DPI parameter.
-o, --outfile OUTFILE
Set the default output location to OUTFIlE.
This is particularly useful in combination with --auto.
-x, --flip-x
Flip the input file's X coordinates (reflect across the Y axis).
-y, --flip-y
Flip the input file's Y coordinates (reflect across the X axis).
-h, --help
Show summary of options.
-version
Show version of program.
Use visolate online using onworks.net services