This is the command chartread that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
Read - Read Target Test Chart.
DESCRIPTION
Read Target Test Chart
SYNOPSIS
chartread [-options] outfile
-v Verbose mode
-c listno
Set communication port from the following list (default 1)
** No ports found **
-t Use transmission measurement mode
-d Use display measurement mode (white Y relative results)
-e Emissive for transparency on a light box
-p Measure patch by patch rather than strip
-x [lx]
Take external values, either L*a*b* (-xl) or XYZ (-xx).
-n Don't save spectral information (default saves spectral)
-l Save CIE as D50 L*a*b* rather than XYZ
-L Save CIE as D50 L*a*b* as well as XYZ
-r Resume reading partly read chart
-I file.cal
Override calibration info from .ti2 in resulting .ti3
-F filter
Set filter configuration (if aplicable):
n None
p Polarising filter
6 D65
u U.V. Cut
-N Disable initial calibration of instrument if possible
-B Disable auto bi-directional strip recognition
-H Use high resolution spectrum mode (if available)
-X file.ccmx
Apply Colorimeter Correction Matrix
-X file.ccss
Use Colorimeter Calibration Spectral Samples for calibration
-Q observ
Choose CIE Observer for CCSS instrument: 1931_2 (def), 1964_10, S&B 1955_2, shaw,
J&V 1978_2
-T ratio
Modify strip patch consistency tolerance by ratio
-S Suppress wrong strip & unexpected value warnings
-W n|h|x
Override serial port flow control: n = none, h = HW, x = Xon/Xoff
-D [level]
Print debug diagnostics to stderr
outfile
Base name for input[ti2]/output[ti3] file
Use chartread online using onworks.net services
