foo2hbpl2 - Online in the Cloud

PROGRAM:

NAME

foo2hbpl2 - Convert Ghostscript pbmraw or bitcmyk format into a ZJS printer stream

SYNOPSIS

foo2hbpl2 [options] <pbmraw-file >hbpl2-file

foo2hbpl2 [options] <bitcmyk-file >hbpl2-file

foo2hbpl2 [options] <pksmraw-file >hbpl2-file

DESCRIPTION

foo2hbpl2 converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome or
color HBPL version 2 streams, for driving the Dell 1355, Dell C1765, Epson AcuLaser M1400,
Epson AcuLaser CX17NF, Fuji Xerox DocuPrint CM205, Fuji Xerox DocuPrint CM215, Fuji Xerox
DocuPrint M215, Fuji Xerox DocuPrint P205, Xerox WorkCentre 3045 MFP, and Xerox WorkCentre
6015 MFP printers.

COMMAND LINE OPTIONS

Normal Options
These are the options used to select the parameters of a print job that are usually
controlled on a per job basis.

-c Force color mode if autodetect doesn't work.

-d duplex
Duplex code to send to printer [1].
│ │ │
│1 off │ 2 long edge │ 3 short edge

-g xpixxypix
Set page dimensions in pixels [10200x6600].

-m media
Media code to send to printer [1].

─────────────────
Media HBPL
─────────────────
plain 1
bond 2
lwcard 3
lwgcard 4
labels 5
envelope 6
recycled 7
plain2 8
bond2 9
lwcard2 10
lwgcard2 11
recycled2 12

-p paper
Paper code to send to printer [1].

────────────────────────────
Paper HBPL
────────────────────────────
A4 1

B5jis 2
A5 3
letter 4
executive 5
fanfold german legal 6
folio 6
legal 7
env#10 9
envMonarch 10
envC5 11
envDL 12

-n copies
Number of copies [1].

-r xresxyres
Set device resolution in pixels/inch [1200x600].

-s source
Source (InputSlot) code to send to printer [7].
│ │
│1 upper │ 4 manual
│2 lower │ 7 auto

-t Draft mode. Every other pixel is white.

-J filename
Filename string to send to printer.

-U username
Username string to send to printer.

Printer Tweaking Options
These are the options used to customize the operation of foo2hbpl2 for a particular
printer.

-u xoffxyoff
Set the offset of the start of the printable region from the upper left corner, in
pixels [0x0].

-l xoffxyoff
Set the offset of the end of the printable region from the lower right corner, in
pixels [0x0].

-L mask
Send logical clipping amounts implied by -u/-l in the ZjStream [3].

0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts

-P Do not send START_PLANE codes on monochrome output. May be needed by some black
and white only printers, such as the HP LaserJet 1000.

-A AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only.

-B BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.

-X padlen
Add extra zero padding to the end of BID segments. The default is 16 bytes.
Padding 16 bytes of zeroes is needed for older ZjStream printers, such as the
Minolta 2200DL and HP LaserJet 1000, and seems harmless to newer ones, such as the
Minolta 2300DL. So the default should be good for all cases.

Debugging Options
These options are used for debugging foo2hbpl2.

-S plane
Output just a single color plane from a color print and print it on the black
plane. The default is to output all color planes.

1 Cyan
2 Magenta
3 Yellow
4 Black

-D level
Set Debug level [0].

EXAMPLES

Create a black and white ZJS stream:

gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
-sOutputFile=- - < testpage.ps
| foo2hbpl2 -r1200x600 -g10200x6600 -p1 >testpage.zm

Create a color ZJS stream:

gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk
-sOutputFile=- - < testpage.ps
| foo2hbpl2 -r1200x600 -g10200x6600 -p1 >testpage.zc

Use foo2hbpl2 online using onworks.net services