This is the Windows app named Arduino ASCOM Focuser Pro DIY to run in Windows online over Linux online whose latest release can be downloaded as myFocuserPro.pdf. It can be run online in the free hosting provider OnWorks for workstations.
Download and run online this app named Arduino ASCOM Focuser Pro DIY to run in Windows online over Linux online with OnWorks for free.
Follow these instructions in order to run this app:
- 1. Downloaded this application in your PC.
- 2. Enter in our file manager https://www.onworks.net/myfiles.php?username=XXXXX with the username that you want.
- 3. Upload this application in such filemanager.
- 4. Start any OS OnWorks online emulator from this website, but better Windows online emulator.
- 5. From the OnWorks Windows OS you have just started, goto our file manager https://www.onworks.net/myfiles.php?username=XXXXX with the username that you want.
- 6. Download the application and install it.
- 7. Download Wine from your Linux distributions software repositories. Once installed, you can then double-click the app to run them with Wine. You can also try PlayOnLinux, a fancy interface over Wine that will help you install popular Windows programs and games.
Wine is a way to run Windows software on Linux, but with no Windows required. Wine is an open-source Windows compatibility layer that can run Windows programs directly on any Linux desktop. Essentially, Wine is trying to re-implement enough of Windows from scratch so that it can run all those Windows applications without actually needing Windows.
SCREENSHOTS
Ad
Arduino ASCOM Focuser Pro DIY to run in Windows online over Linux online
DESCRIPTION
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno.A popular DIY ASCOM focuser with more than 92,000 downloads.
(c) Copyright Robert Brown 2014-2020. All Rights Reserved.
Permission is granted for personal and Academic use only.
To order a ready-made assembled controller, please see
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/OrderForm-myFocuserPro2M.pdf/download
Please contribute to the ongoing development of this project via PayPal and send the amount to user [email protected] (Robert Brown). All contributions are gratefully accepted.
Features
- Software - Windows Application or fully compliant ASCOM driver
- Create using stripboard layout or using PCB design
- Tested with INDI moonlite driver under Ubuntu and Ekos
- Tested on MacBook with TheSky and Moonlite driver
- Manual or full automated remote control (eg focusmax)
- ASCOM driver tested with FocusMax, Nebulosity 4.1.1, APT v3.13 and ScopeFocus
- Use manually via two push buttons for control of IN and OUT position
- Manual zero position (hold down both push buttons for 2 seconds) or via application/ASCOM driver
- LED indications for IN, OUT (optional) and external PWR
- LCD1602/I2C display (optional) for positional information (Current and Target positions)
- Supported Driver Boards - ULN2003, L293D, L298N, DRV8825, EasyDriver, ST6128, RAPS128
- Temperature probe support (optional - DS18B20 accurate to 0.5 degree)
- Reverse voltage protection on 12VDC input
- Option1: 28BYJ-48 Stepper Motor and ULN2003 driver board using Arduino Nano
- Option2: NEMA17HS15-0404S-PG5 Stepper Motor and L293D Motor Shield using Arduino Uno
- Option3: NEMA17 and DRV8825 driver board - up to 6400 steps per revolution!
- Option4: NEMA17 and EASYDRIVER board - up to 1600 steps per revolution
- Specify Reverse Direction, Coil Power, Stepping mode in either ASCOM or Windows application
- Important focuser parameters stored in controller EEPROM and retrieved when driver/application connects
- Full build instructions, diagrams, test scripts, comprehensive manual, bracket design and more
- Detailed instructions on initial setup, operation and selection of stepper motors
- Full parts list with suppliers, costs and build options
- Arduino code, ASCOM driver and Windows Application support for all build options
- 04-Nov-2014 Support for the DRV8825 driver board, 1.5A and microstepping to 1/32!
- 05-Nov-2014 Support for the EASYDRIVER v44 driver board
- 24-Nov-2014 Support for L298N driver board
- 10-Jan-2015 Second ASCOM driver added to support a second focus controller
- 04-Mar-2015 Rotary Encoder option added for DRV8825 and Easydriver builds
- 07-Mar-2015 IR Remote control option added for DRV8825 and Easydriver builds
- 01-May-2015 A4988 Driver Board support added
- 08-July-2015 Bluetooth Wireless adapter HC05 option added
- 01-Oct-2015 PCB Layout added DRV8825_HW203
- 11-Oct-2015 ST6128 Driver Module and RAPS128 Driver added
- 01-May-2016 Jogging Control added
- 09-Sept-2016 Language support added
- DO NOT DOWNLOAD SOFTWARE FROM OTHER SITES AS AN EXE/ISO/ZIP FILE - THESE FILES ARE NOT SUPPORTED AND MAY CONTAIN MALWARE
Audience
Education
User interface
Win32 (MS Windows)
Programming Language
C#, Assembly
This is an application that can also be fetched from https://sourceforge.net/projects/arduinofocuscontrollerpro/. It has been hosted in OnWorks in order to be run online in an easiest way from one of our free Operative Systems.
