This is the command tttprobe that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
tttprobe - Tele Traffic Tapper probe - A probe to collect local traffic-data and send it
to a remote instance of tttview
SYNTAX
ttt [-interface device] [-interval ms] [-multicast] [-port dest_port] [-ttl time-to-live]
[Destination]
DESCRIPTION
tttprobe is the probe program in the ttt program suite. tttprobe locally collects
traffic-data and sends it over a network to an instance of tttview.
To run tttview, it is not necessary to be "root".
The ttt program suite is yet another descendant of tcpdump but it is capable of real-time,
graphical, local and remote traffic-monitoring. It won't replace tcpdump, rather, it
helps you find out what to look into with tcpdump.
OPTIONS
ttt [-interface device] [-interval ms] [-multicast] [-port dest_port] [-ttl time-to-live]
[Destination]
-interface device
specifies the interface for packet capture. If not specified, the default interface
is chosen.
-interval ms
Sets the interval in Milliseconds. If omitted, a interval of 1000 msec. is used as
default.
-multicast
Shorthand for the default multicast destination "224.8.8.0".
-port dest_port
Specifies the udp port number on the remote host where the traffic-data should be
sent to. If omitted, port 7288 is used as default.
-ttl time-to-live
Specifies the time-to-live for multicast. If omitted, 1 is used as default to
restrict the multicast to the local subnet.
Destination
Specifies the remote host where the traffic-data should be sent to. Destination can
be omitted only, if -multicast is specified. Destination can be a uni- or multicast
address.
EXAMPLES
Remark: "hostA" is allways the host where traffic-data is collected with tttprobe and
"hostB" is allways the host where the traffic-data is displayed with tttview.
point-to-point monitoring:
hostA: tttprobe hostB
hostB: tttview
or:
hostA: tttprobe ip_of_hostB
hostB: tttview
multicast:
when using the default multicast address:
hostA: tttprobe -multicast
hostB: tttview -multicast
this is equivalent to:
hostA: tttprobe 224.8.8.0
hostB: tttview -addr 224.8.8.0
AUTHORS
tttprobe was written by Kenjiro Cho < [email protected]>.
This manual page was written by Thomas Scheffczyk
<[email protected]>, for the Debian GNU/Linux system (but may be
used by others).
Use tttprobe online using onworks.net services
