EnglishFrenchSpanish

OnWorks favicon

r.lakegrass - Online in the Cloud

Run r.lakegrass in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command r.lakegrass that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


r.lake - Fills lake at given point to given level.

KEYWORDS


raster, hydrology, hazard, flood

SYNOPSIS


r.lake
r.lake --help
r.lake [-no] elevation=name water_level=float [lake=name] [coordinates=east,north]
[seed=name] [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:
-n
Use negative depth values for lake raster map

-o
Overwrite seed map with result (lake) map

--overwrite
Allow output files to overwrite existing files

--help
Print usage summary

--verbose
Verbose module output

--quiet
Quiet module output

--ui
Force launching GUI dialog

Parameters:
elevation=name [required]
Name of input elevation raster map

water_level=float [required]
Water level

lake=name
Name for output raster map

coordinates=east,north
Seed point coordinates
Either this coordinates pair or a seed map have to be specified

seed=name
Input raster map with given starting point(s) (at least 1 cell > 0)
Either this parameter or a coordinates pair have to be specified

DESCRIPTION


The module fills a lake to a target water level from a given start point. The user can
think of it as r.grow with additional checks for elevation. The resulting raster map
contains cells with values representing lake depth and NULL for all other cells beyond the
lake. Lake depth is reported relative to specified water level (specified level = 0
depth).

This module uses a 3x3 moving window approach to find all cells that match three criteria
and to define the lake:

· cells are below the specified elevation (i.e., water level);

· cells are connected with an initial cell (seed or coordinates pair value);

· cells are not NULL or masked.

The water level must be in DEM units.

NOTES


The seed (starting) point can be a raster map with at least one cell value greater than
zero, or a seed point can be specified as an E, N coordinate pair. If the seed is
specified as a coordinate pair, an additional check is done to make sure that the target
water level is above the level of the DEM. When a raster map is used as a seed, however,
no such checks are done. Specifying a target water level below surface represented by DEM
will result in an empty map. Note: a raster lake map created in a previous run can also be
used as a seed map for a new run to simulate rising water levels.

The module will create a new map (lake=foo) or can be set to replace the input (seed=bar)
map if the -o flag is used. The user can use -o flag to create animations of rising water
level without producing a separate map for each frame. An initial seed map must be
created to start the sequence, and will be overwritten during subsequent runs with
resulting water levels maps (i.e., a single file serves for both input and output).

Negative output (the -n flag) is useful for visualisations in NVIZ. It equals the
mapcalc’s expression "negative = 0 - positive".

r.mapcalc equivalent - for GRASS hackers
This module was initially created as a script using r.mapcalc. This had some limitations
- it was slow and no checks where done to find out required iteration count. The shell
script code (using r.mapcalc) used in the original script is shown below:
${seedmap} = if( ${dem}, \
if( if( isnull(${seedmap}),0,${seedmap}>0), ${wlevel}-${dem}, \
if( \
if(isnull(${seedmap}[-1,0]),0, ${seedmap}[-1,0]>0 && ${wlevel}>${dem}) ||\
if(isnull(${seedmap}[-1,1]),0, ${seedmap}[-1,1]>0 && ${wlevel}>${dem}) ||\
if(isnull(${seedmap}[0,1]), 0, ${seedmap}[0,1]>0 && ${wlevel}>${dem}) ||\
if(isnull(${seedmap}[1,1]), 0, ${seedmap}[1,1]>0 && ${wlevel}>${dem}) ||\
if(isnull(${seedmap}[1,0]), 0, ${seedmap}[1,0]>0 && ${wlevel}>${dem}) ||\
if(isnull(${seedmap}[1,-1]),0, ${seedmap}[1,-1]>0 && ${wlevel}>${dem}) ||\
if(isnull(${seedmap}[0,-1]),0, ${seedmap}[0,-1]>0 && ${wlevel}>${dem}) ||\
if(isnull(${seedmap}[-1,-1]),0, ${seedmap}[-1,-1]>0 && ${wlevel}>${dem}),\
${wlevel}-${dem}, null() )))

The ${seedmap} variable is replaced by seed map names, ${dem} with DEM map name, and
${wlevel} with target water level. To get single water level, this code block is called
with same level numerous times (in a loop) as the lake grows by single cells during single
run.

KNOWN ISSUES


· The entire map is loaded into RAM.

· A completely negative seed map will not work! At least one cell must have a value
> 0. Output from r.lake -n cannot be used as input in the next run.

EXAMPLE


Example of small flooding along a street (North Carolina sample dataset):
g.region raster=elev_lid792_1m -p
# water accumulation next to street dam
r.lake elev_lid792_1m coordinates=638759.3,220264.1 water_level=113.4 lake=flooding
# draw resulting lake map over shaded terrain map
r.relief input=elev_lid792_1m output=elev_lid792_1m_shade
d.rast elev_lid792_1m_shade
d.rast flooding
d.vect streets_wake

Small flooding along a street (r.lake, using Lidar 1m DEM)

Use r.lakegrass online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

  • 1
    strace
    strace
    The strace project has been moved to
    https://strace.io. strace is a
    diagnostic, debugging and instructional
    userspace tracer for Linux. It is used
    to monitor a...
    Download strace
  • 2
    gMKVExtractGUI
    gMKVExtractGUI
    A GUI for mkvextract utility (part of
    MKVToolNix) which incorporates most (if
    not all) functionality of mkvextract and
    mkvinfo utilities. Written in C#NET 4.0,...
    Download gMKVExtractGUI
  • 3
    JasperReports Library
    JasperReports Library
    JasperReports Library is the
    world's most popular open source
    business intelligence and reporting
    engine. It is entirely written in Java
    and it is able to ...
    Download JasperReports Library
  • 4
    Frappe Books
    Frappe Books
    Frappe Books is a free and open source
    desktop book-keeping software that's
    simple and well-designed to be used by
    small businesses and freelancers. It'...
    Download Frappe Books
  • 5
    Numerical Python
    Numerical Python
    NEWS: NumPy 1.11.2 is the last release
    that will be made on sourceforge. Wheels
    for Windows, Mac, and Linux as well as
    archived source distributions can be fou...
    Download Numerical Python
  • 6
    CMU Sphinx
    CMU Sphinx
    CMUSphinx is a speaker-independent large
    vocabulary continuous speech recognizer
    released under BSD style license. It is
    also a collection of open source tools ...
    Download CMU Sphinx
  • More »

Linux commands

crm
crm
Use crm online using onworks.net
services. ...
Run crm
  • 4
    crmgr
    crmgr
    crmgr - administration utility for QDBM
    Curia ...
    Run crmgr
  • 5
    gappletviewer
    gappletviewer
    gappletviewer - Load and runs an applet
    ...
    Run gappletviewer
  • 6
    gaps
    gaps
    mummer - package for sequence alignment
    of multiple genomes ...
    Run gaps
  • s-processed="true">
    g15stats
    g15stats - A CPU/Memory/Swap usage
    meter for G15Daemon DESCRIPTION: The
    packages provides the following usage
    meter for LCD on some Logitech
    keyboards, usind g...
    Run g15stats
  • More »
  • Ad