EnglishFrenchSpanish

OnWorks favicon

dvidvi - Online in the Cloud

Run dvidvi in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command dvidvi that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


dvidvi - selects and/or re-arranges pages in a TeX dvi file

SYNOPSIS


dvidvi [param] infile outfile

DESCRIPTION


Copyright
dvidvi 1.0, Copyright (C) 1988-91, Radical Eye Software

Introduction
The dvidvi program converts a dvi file into another dvi file, with perhaps certain
changes.

Parameters
-f n page n is first page selected
-l n page n is last page selected
-n n select at most n pages. Notice that n is the number of pages selected,
independently of the number of pages actually contained in a sheet
-i { n1..n2 | n1 }[,...]
include pages (ranges allowed). When this option is used, ONLY the specified
pages are selected. However, we can exclude from these pages with the option -x
-x { n1..n2 | n1 }[,...]
exclude pages (ranges allowed)
-q work in quiet mode, that is do not print in the screen messages of how the work
is being done.
-r reverse the order of the pages.

The page numbers for the above options -f -l -i and -x can be specified in different ways.
1) If a number n is given, it is interpreted as the n'th page from the begining of the
.dvi file. Of course, this number is independent of the page number assigned by TeX.
2) TeX page numbers are those who are actually written in the page; these page numbers
can be modified, for example, by using the TeX commands \pagenumbering,
\setcounter{page}{n}, and \addtocounter{page}{n}. A TeX page number can be specified
by preceding the number n with the character @. Thus, if you specify -f @25 -l @30 you
select the pages between 25 and 30, these numbers being those assigned by TeX.
3) However, several pages can have the same TeX page number in a .dvi file. For example,
the introductory pages in a book are numbered i, ii, and so on until the first chapter
begins and then, the pages are numbered 1, 2, etc. In this case, the pages numbered i
and 1 in the .dvi file have the same TeX page number. If you want to select for
example the second occurrence of the page numbered 1, you can specify a page number as
(@2)1. Thus @1 is equivalent to (@1)1. For example, if you specify -f (@2)1 -l(@2)10
you select the pages between 1 and 10 of the first chapter, not the introductory pages
between i and x.

There is another parameter that tells dvidvi how you want to change page layout and
specifications. This is the -m parameter.
* The number preceding the colon is the modulo value. Everything will be done in chunks
of pages this big. If there is no colon, than the default value is assumed to be one.
The last chunk of pages is padded with as many blank pages as necessary.
* Following the colon is a comma-separated list of page numbers. These page numbers are
with respect to the current chunk of pages, and must lie in the range zero to the
modulo value less one. If a negative sign precedes the number, then the page is taken
from the mirror chunk; if there are m chunks, then the mirror chunk of chunk n is the
chunk numbered m-n-1. Put simply, it is the chunk numbered the same, only from the
end. This can be used to reverse pages. If no number is given, the page number
defaults to 1.
* Following each page number is an optional offset value in parenthesis, which consists
of a pair of comma-separated dimensions. Each dimension is a decimal number with an
optional unit of measure. The default unit of measure is inches, or the last unit of
measure used. All units are in true dimensions. Allowable units of measure are the
same that TeX allows: in, mm, cm, pt, pc, dd, and cc.

EXAMPLES


-m - Reverses the order of the pages. This time, both the modulo and the page number
are defaulted.
-m 2:0 Selects the first, third, fifth, etc. pages from the file. Print this one after
printing the next, taking the paper out of the feed tray and reinserting it into
the paper feed.
-m 2:-1 Selects the second, fourth, etc. pages, and writes them in reverse order.
-m 4:-1,2(4.25in,0in)
-m 4:-3,0(4.25in,0in)
Useful for printing a little booklet, four pages to a sheet, double-sided, for
stapling in the middle. Print the first one, put the stack back into the
printer upside down, and print the second. The `in' specifications are
superfluous.
-m ,(1pt,1)
Scare your system administrator! Actually, things are so blurry with this
option, you may want to send enemies letters printed like this. *Long* letters.
-m 4:0(5.5in,4.25),3(0,4.25)
-m 4:1(0in,4.25),2(5.5,4.25)
Print a four-page card on one sheet. Print the first, rotate the paper 180
degrees and feed it again. (PostScript people can do funny tricks with
PostScript so this isn't necessary.)

March 1994 DVIDVI(1)

Use dvidvi online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

  • 1
    GenX
    GenX
    GenX is a scientific program to refine
    x-ray refelcetivity, neutron
    reflectivity and surface x-ray
    diffraction data using the differential
    evolution algorithm....
    Download GenX
  • 2
    pspp4windows
    pspp4windows
    PSPP is a program for statistical
    analysis of sampled data. It is a free
    replacement for the proprietary program
    SPSS. PSPP has both text-based and
    graphical us...
    Download pspp4windows
  • 3
    Git Extensions
    Git Extensions
    Git Extensions is a standalone UI tool
    for managing Git repositories. It also
    integrates with Windows Explorer and
    Microsoft Visual Studio
    (2015/2017/2019). Th...
    Download Git Extensions
  • 4
    eSpeak: speech synthesis
    eSpeak: speech synthesis
    Text to Speech engine for English and
    many other languages. Compact size with
    clear but artificial pronunciation.
    Available as a command-line program with
    many ...
    Download eSpeak: speech synthesis
  • 5
    Sky Chart / Cartes du Ciel
    Sky Chart / Cartes du Ciel
    SkyChart is a software to draw chart of
    the night sky for the amateur astronomer
    from a bunch of stars and nebulae
    catalogs. See main web page for full
    download...
    Download Sky Chart / Cartes du Ciel
  • 6
    GSmartControl
    GSmartControl
    GSmartControl is a graphical user
    interface for smartctl. It allows you to
    inspect the hard disk and solid-state
    drive SMART data to determine its
    health, as w...
    Download GSmartControl
  • More »

Linux commands

  • 1
    abc2abc
    abc2abc
    abc2abc - a simple abc
    checker/re-formatter/transposer ...
    Run abc2abc
  • 2
    abc2ly
    abc2ly
    abc2ly - manual page for abc2ly
    (LilyPond) 2.18.2 ...
    Run abc2ly
  • 3
    coqmktop
    coqmktop
    coqmktop - The Coq Proof Assistant
    user-tactics linker ...
    Run coqmktop
  • 4
    coqtop
    coqtop
    coqtop - The Coq Proof Assistant
    toplevel system ...
    Run coqtop
  • 5
    g.copygrass
    g.copygrass
    g.copy - Copies available data files in
    the current mapset search path to the
    user�s current mapset. KEYWORDS:
    general, map management ...
    Run g.copygrass
  • 6
    g.dirsepsgrass
    g.dirsepsgrass
    g.dirseps - Internal GRASS utility for
    converting directory separator
    characters. Converts any directory
    separator characters in the input string
    to or from na...
    Run g.dirsepsgrass
  • More »

Ad