ttink - Online in the Cloud

PROGRAM:

NAME

ttink - program to control your EPSON printer

SYNOPSIS

ttink [[-d | --device] device_file] [[-m | --model] model_number] [-r | --reset] [-c |
--clean] [-n | --nozzle-check] [-s | --status] [-a | --align-head] [-e |
--exchange-ink] [-i | --identity] [-v | --version] [-l | --list-printer]

mtink [-noAutoDetect]

DESCRIPTION

This manual page documents briefly the ttink and mtink commands.

ttink is the command line version of mtink

This manual page was written for the Debian GNU/Linux distribution because the original
program does not have a manual page.

mtink is a status monitor for EPSON ink jet printer

With mtink you will be able to display the remaining ink quantity and the state of your
printer. Operation as check nozzle, clean nozzle and align head are also implemented.

OPTIONS

These programs follow the usual GNU command line syntax, with long options starting with
two dashes (`-'). A summary of options is included below.

Options for ttink

-d, --device
Specify the device file associated with the printer. Depending on what kind of printer
you have, it could be /dev/parport, /dev/usb/lp0...

-m, --model
Specify the printer or the entry number corresponding to your printer. If not
supplied, the program try to guess what kind of printer you have.

-r, --reset
To command the reset of the printer.

-n, --nozzle-check
Print a pattern. You can then check if nozzle are well aligned.

-s, --status
This is the default option. It prints the remaining quantities of ink in each
cartridge.

-v, --version
Show version of program.

-l, --list-printer
Show all the printer handled by the program.

-a, --align-head
Begin an head alignement.

-e, --exchange-ink
Exchange the cartridge (not all printer).

-i, --identity
Show the identity of the printer.

-c, --clean
Clean nozzle.

Options for mtink

-noAutodetect
Disable autodetection of the printer.

Use ttink online using onworks.net services